suspension

  1. max0611

    SUSPENSION REBUILD

    Hello, I currently have just under 95k miles on my 08 GT/CS and am going to be completely rebuilding the suspension front and rear in hopes of totally refreshing the ride on the street and in the canyons. If anyone has any input I would appreciate it. I am dropping about 3500$ and that's with...
  2. D

    sway bars, rear and wheel spacers

    76 y/o guy ...I just changed out the my convertible base front sway bar with a whiteline kit. The installer said the rear would not fit. So a couple of questions? Is there a way to use the rear on the convertible? If, so how? If not, anybody want a deal? If not, best replacement of links...
  3. T

    Quality Suspension?

    Hey everyone, hope yall are doing well. So I've been wanting to change my suspension because well mine is completely worn. I have a 2007 v6 Mustang. It's my daily driver right and I just want something to give a quality ride. I do live in California so I do have to deal with the horrible roads...
  4. Andrey Sidorov

    Full suspension overhaul

    Hey lads, so the bee bit me in the ass yesterday and since it’s a winter season and car stays either way I thought why not to do a full suspension overhaul since it’s all 06 oem stuff besides springs. Here is the list of what I decided on and all the suggestions will be much appreciated as well...
  5. Nikotopless

    Car wobbles when accelerating

    Greetings everyone! So I just received my 2015 Mustang GT PP back from the dealership after a wheel alignment, all new spark plugs and most importantly, my motor replaced (old one had a cylinder 8 misfire with no recourse of fixing). Strangely enough, the car “wobbles” when accelerating at...
  6. S

    Replace front shock + struts

    Hello, I'm new to the forum and looking for some recommendations. I'm looking to replace the front shocks and struts on my 2007 mustang, V6. I don't know much about the difference between parts and was hoping for replacement suggestions that are close to the original part/ride quality. I've...
  7. Mackitraz

    Camber Plate / Suspension upgrade advice needed

    First post! Working on suspension upgrades. Street driven '08 GT, trying to upgrade handling and stance of the car while replacing some worn out parts. I want to lower the car 1-1.5" with appropriate corrective parts. Question: Trying to decide to go with a Steeda Upper Strut Mount or with...
    • Mackitraz
    • Thread
    • bmr camber plates handling lowering steeda suspension upper strut mount
    • Replies: 24
    • Forum: Mustang Chit Chat
  8. N

    Need help with suspension parts

    Hello, I own 2010 Mustang 4.0 v6 automatic. Im from Georgia(country) and i can not find any parts here from this list. Rear lower control arm Rear upper control arm Rear centre bush Front lower control arm bush I'm searching for those parts on Rockauto and i dont know Partnumbers. some of them...
  9. S

    Lowering the Stang

    Evening gents (and ladies) literally my first time posting so pardon any formatting issues. I've got a stock (suspension wise) 2007 GT. I want to lower it the right way. Cheaper is better but I prioritize quality 70% to 30%. I'd really appreciate links to buy (I prefer American Muscle, [good...
  10. G

    Ford performance Handling Pack

    with what stuff should i install my handling pack? Like what brand of control arms and panhard bar. Im serching something between track and street use.
  11. Bo Young

    Coil Springs & Struts

    Looking for expert advice: Bought my ‘05 GT used, and it came with coil springs that appear lower than a stock GT (it has been lowered, & the springs are blue if that helps hah). I’ve been told that putting back the factory coil springs will raise the ride height to where I’d like it, and it...
  12. S

    Steering Response

    First time poster, and just have some questions someone can answer. I currently have a 2010 mustang that I am wanting to turn into a track car, the handling of the car seems to be good however the steering does not seem to translate to the wheels very well nor does it seem to give much feed...
  13. N

    New to mustangs

    Honestly was just wondering on what’s a good suspension/wheel setup that is affordable since i don’t know much about mustangs and there specs. 2012 S197 premium
  14. Nick93

    Lowering springs supporting mods

    Hey all. I just ordered a set the eibach sportline lowering spring kit for my 06 GT. I plan to pair them with the Koni sport adjustable shock and spring kit. What supporting mods do I need to be able to align it properly after installation (1.6 inch drop in the front and 2 inch in the rear) and...
  15. beefcake

    TBR Final Sale Day on Pedders and Koni

    Today is the final day for our sale on Pedders and Koni suspension products. If you are interested in any of their items send us a message for pricing. http://www.teambeefcakeracing.com/koni-adjustable-shocks-struts.html http://www.teambeefcakeracing.com/pedders-suspension.html
  16. beefcake

    TBR 15% Off Viking and BMR

    Don't miss out on our end of the year deals on suspension products from BMR and Viking. 15% off all items from these brands. If you have any questions feel free to send a message or call us at 1-855-827-7223. http://www.teambeefcakeracing.com/bmr-suspension.html...
  17. beefcake

    Team Beefcake Racing's 15% Off BMR, Viking, and UPR Sale

    Today is the day to save $$ on UPR, Viking, and BMR with our 15% off sale. NOW is the time to get a UPR catch can at a great price! * No Coupon Necessary * All Ford 1979-2018 models * Suspension, Interior, Exterior, Engine etc.. Call 1-855-827-7223 or message us direct...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top