Going For 800 Rwhp

[05stroker]

Well I decided not to do the low voltage shock to my foot and here are the warning lights I installed. The pics do not due them justice. They are very bright, there will be no missing them and knowing when to get out of the gas. Also you can see the two WB gauges left is left and right is right.

The low fuel pressure warning lights via a Hobbs switch located at the fuel regulator is set at 45 psi.

Here is the oil pressure warning light that comes on if it drops below 20 psi.

 

[dysan]

Oddly enough there's a flashing & beeping alarm that I have seen used in powder coating and there is a 12v version that may work for you.

http://www.auberins.com/index.php?main_page=product_info&cPath=7_33&products_id=218

 

[05stroker]

Oddly enough there's a flashing & beeping alarm that I have seen used in powder coating and there is a 12v version that may work for you.

http://www.auberins.com/index.php?main_page=product_info&cPath=7_33&products_id=218

Sounds like a reverse alarm on a work truck. I wonder how loud it really is in person.

 

[lostsoul]

good to see her up and running.. love the procharger.. where did you get the lights? I need a 12v very bright led for my meth kit.. I tried the shitty lights at vato zone, but they suck too =-/

 

[PNR Welding]

good to see her up and running.. love the procharger.. where did you get the lights? I need a 12v very bright led for my meth kit.. I tried the shitty lights at vato zone, but they suck too =-/

+1 for the meth kit light.

 

[05stroker]

good to see her up and running.. love the procharger.. where did you get the lights? I need a 12v very bright led for my meth kit.. I tried the shitty lights at vato zone, but they suck too =-/

That is exactly where I got these at Autozone.

 

[lostsoul]

damn.. got to get my red bandanna and head out again..haha

 

[Doug M]

thats an awesome ride, one that most of us can only dream of. i would love to see more vids. congrats on the beast.

 

[GrnBullitt08]

Like what ya did with the warning lights. You definitely can't miss those....you'll avoid blowing the motor but try not to crash because your ass will be blinded if one goes off haha.

 

[05stroker]

Well I got the car out Sun. after putting the bumper and hood back on and washed the car and drove about 50 miles cruising and varying the rpms and lots of decels to help seat the rings, then I was then going to do a pull for Lito but when I was washing the car the water flooded the Hobbs switch I put in for the fuel pressure warning switch. Where I have it if it is faced strait up then the water from the hood drains onto it. I bought a new one and tilted it to where the water wouldn't effect it. I also put some electrical grease in the opening on the top before I put the plug in. The other Hobbs switch has dried out now though so I have an extra now. Here are a few pics of the car all cleaned up and I will post a couple videos of the first pull in 2nd gear to 5k in a few after they finish uploading.

 

[05stroker]

Like what ya did with the warning lights. You definitely can't miss those....you'll avoid blowing the motor but try not to crash because your ass will be blinded if one goes off haha.

If this motor blows I will have wished I crashed it. I won't lie guys, at this point I am terrified of WOT!

 

[GrnBullitt08]

If this motor blows I will have wished I crashed it. I won't lie guys, at this point I am terrified of WOT!

Been there before....still kind of the same way with my 5.0 with the way this car has been acting....but if it blows it blows, not much you can other than drink the pain away and try again

 

[Doug M]

looks great! I like the roush stickers, got any more?

 

[05stroker]

Been there before....still kind of the same way with my 5.0 with the way this car has been acting....but if it blows it blows, not much you can other than drink the pain away and try again

This thing has already made me some sort of a functioning alcoholic!

looks great! I like the roush stickers, got any more?

No sorry, I bought that a while back and it was there when the car was painted. We just sanded around the sticker and the dusted it with two coats of paint and then the four coats of clear like the rest of the car. I really had to watch that area while color sanding the car. The only down side to the sanding job I did was that I cut through the clear on the nose of the front bumper and it will need some touch up sometime.

 

[05stroker]

 

[Doug M]

dear lord that sounded awesome! bring em on never get tired of your car or build, if i had about an extra 50 grand like you, i would do the same build..lol

 

[05stroker]

dear lord that sounded awesome! bring em on never get tired of your car or build, if i had about an extra 50 grand like you, i would do the same build..lol

No you wouldn't, you would have to be without the car for a long time if its done in your own garage and devote your whole life to your car! I wouldn't wish this on anyone. There are a lot easier ways to make power these days. LOL. Either way I wouldn't trade my car for a new one without them paying me at this point! I would have done a lot of things differently if I had known what I was going to put my self through.

 

[Doug M]

yea it was down for a long time, that was tough i know, boy look now, its awesome.lol.

 

[ctt326]

Yeah your car is absolutely awesome. Be proud of that thing, its sick.

 

[joedls]

My favorite car on this site! And it sounds awesome!!