Nelson Valdes
Junior Member
- Joined
- Jul 23, 2019
- Posts
- 18
- Reaction score
- 2
Hi!
Anyone have any experience with the H&R SS lowering springs. These will drop the car 1" in the front and 2.3" at the rear. I have a 2010 Mustang GT and the wheel gap in the back is ridiculous at approx. 3 1/4" from fender to top of tire while the front is 1 1/4" from fender to tire. I have 18x8 OEM bullet style rims with stock sized 235/50 on the front and 255/45 on the rear. I was planning in the future to upgrade to bigger rims and tires. I was thinking maybe 255 tires for the front and maybe 275 or 285 for the rear on 19" rims. 20" rims sound big, I don't know. I understand that I will have to replace the pan hard rod, struts and shocks for this setup. Also I don't know if I would need CC plates or maybe the GT500 strut mounts. Any opinions on the springs and tire set up would be greatly appreciated.
Anyone have any experience with the H&R SS lowering springs. These will drop the car 1" in the front and 2.3" at the rear. I have a 2010 Mustang GT and the wheel gap in the back is ridiculous at approx. 3 1/4" from fender to top of tire while the front is 1 1/4" from fender to tire. I have 18x8 OEM bullet style rims with stock sized 235/50 on the front and 255/45 on the rear. I was planning in the future to upgrade to bigger rims and tires. I was thinking maybe 255 tires for the front and maybe 275 or 285 for the rear on 19" rims. 20" rims sound big, I don't know. I understand that I will have to replace the pan hard rod, struts and shocks for this setup. Also I don't know if I would need CC plates or maybe the GT500 strut mounts. Any opinions on the springs and tire set up would be greatly appreciated.