ESP v6
Member
- Joined
- Nov 3, 2009
- Posts
- 260
- Reaction score
- 0
I think this is it...
That is 2.5" to the frame rail, before adjusting the suspension up by half an inch.
Some of the obvious reasons why this is too low...
Flat spots in the exhaust.
The underside of my k member
I did this on an interstate.
What I don't have a picture of is my trans temp gauge which had gotten up about 200.
Since adjusting the ride height I haven't had any problem with temps raising or scraping places I shouldn't.
That is 2.5" to the frame rail, before adjusting the suspension up by half an inch.
Some of the obvious reasons why this is too low...
Flat spots in the exhaust.
The underside of my k member
I did this on an interstate.
What I don't have a picture of is my trans temp gauge which had gotten up about 200.
Since adjusting the ride height I haven't had any problem with temps raising or scraping places I shouldn't.