Be more specific. Is the grease not going into the fitting and squirting out all over the place? Does it feel like it’s going in and you don’t see any coming out of bushing? Gun not working? What’s happening exactly?This may sound like a silly question, but I am having trouble greasing the BMR poly bushings. I hooked up my grease gun, but it doesn't seem like any grease is entering the fitting.
Be more specific. Is the grease not going into the fitting and squirting out all over the place? Does it feel like it’s going in and you don’t see any coming out of bushing? Gun not working? What’s happening exactly?
Try another, ensure the grease gun is straight (in line w/the fitting) if grease enters another one fine then you may need to replace the fitting on the one that will not fill. It's not uncommon for fittings to fail. As noted above they're a common item that can be found at most any hardware store.
If it won't fill any fitting/no grease comes out at all then the end of the grease gun may need to be replaced. I've had both happen.
Use the tip of a small screwdriver and see if you can push the ball in and try again. Or just replace it.
I used to run a garbage business. Our trucks had many grease fittings. Sometimes they work, sometimes they don’t.
The grease isn't going into the fittings and squirts around the fittings. I bought the grease gun from Jegs (see image below)
View attachment 83830