HSW Microedge wiring questions

[06iornhorse]

I have two questions for any one that has installed one. It says to hookup the white wire on to the tan fuel injector wire for the rpm connection. so I hooked it up to the first injector on the drivers side closest to the front of the car. My question on this is wouldn't we want to hook the RPM connection to one of the coils. The next wiring question I have has to do with the wideband hook up it talks about 1 wire to 4 wire O2's but my AEM UEGO O2 has six and it also says that the wire I want will fluctuate around .45V when warm but 4 of the six wires are in that range. So what wire do I hook up to? Any help would be greatly appreciated.

 

[1BADHRSE]

I had this product in my car for a while never juiced though lol....

I used the tan wire then adjusted the setting in the micro edge itself to get it dialed in...
Let me warn you that using a wide-band hooked up to the Edge is a bitch I couldnt get mine dialed in at all...

It took me hours to just get a reading for the O2s but then again I just hooked it up to the + anolog on the AEM..

 

[06iornhorse]

Got it all wired up a d working great will hav it tuned tomorrow.

 

[Nick@HSW]

Got it all wired up a d working great will hav it tuned tomorrow.

Glad to hear. For future users using search, yes hook it up to the injector for a more accurate RPM reading. The coils get funky at low RPM's on the S197's. Analog output is what you're looking for on wideband as well.

Thanks!

Nick