ID1000 injectors & H-beam rods

[GB10]

I have a set of Injector Dynamics 1000cc injectors for sale. I used them for about 300 miles and decided I am just going to go all the way, so I need bigger injectors now. $700 shipped.

I also have a set of (8) Modmax H-beam rods for stock stroke setups (5.933" length). They come with ARP2000 rod bolts and are just Manley's with a different marking on the rod. I ran 1000hp through them with no issue, so they are very strong. They have about 900 miles on them. $325 shipped.

 

[GB10]

ttt

 

[KrisR]

Are the injectors Ev1 or Ev6 connector? Thanks.

 

[GB10]

They use the uscar plug (used on ev6 and ev14) which is direct plug and play with 05-10 Mustang GTs. It comes with connectors to install on your harness if you have the connectors which come on ev1 injectors.

 

[GB10]

this stuff is obo

 

[calispecial08]

why are you getting rid of the rods?

 

[GB10]

I got some manley billet I-beam rods for a real good price. I'm going to be making more power than I want to put through the h-beams. I will probably be making about 1300hp at the crank with my new setup.

 

[SherrodMustang]

GLWS.... Have had these same injectors and they idle and support big power. Good deal and well worth the money.

ID2000 injectors now with good results.

Going to love the Manley Billet I-beam rods. Run the same rods in my motor with zero issues.

Stock vs Manley I-beam

 

[GB10]

Thanks for the help with the sale. Like said above, these injectors are more expensive, but they work great and idle is great with them too.

 

[GB10]

ttt. For people that don't feel like researching, the injectors are $920 new and the rods are $469 new, so this will save you a pretty good amount of money.

 

[GB10]

ttt

 

[jafo111]

ID 1000's

Payment sent for the ID1000's

Dave

 

[GB10]

Injectors sold to jafo111.

Still have rods if anyone is intersted. Just fyi, the rods were side clearanced for more side clearance sine I clearanced my motor for 20w50 oil.