JPC Turbo Kit? Race setup

[LTHLCHRG]

Interested in this kit, is it available yet? Didn't see it on the website

Call them and they will build you one.In the process of putting mine on

 

[t-kid]

Badass take pics man!

 

[LTHLCHRG]

Will do!

 

[sharkbaits]

Just give us a call or shoot me a PM if your interested in the kit

 

[JoshK]

Call them and they will build you one.In the process of putting mine on

Do you have any pictures LTHLCHRG? Also, is this a 3" downpipe?

 

[LTHLCHRG]

5" downpipe that splits into two threes. Car still in the shop but will post pics as soon as I can.

 

[JoshK]

Does it come as a 5" or did you have it custom made that way? Are you running with ps? Just AC Delete?

 

[LTHLCHRG]

The hotside from the turbo back is all custom. I put a flaming river manual rack and took the ac out.

 

[JoshK]

Mind sharing what turbo you are running? Auto car or stick?

 

[SStang]

I was just wondering if you sold the ball and socket that bolts to the header, or where to buy those from?

Thanks.

 

[JoshK]

I was thinking of using these. Only need one side but haven't found that anywhere. It is 2.5" right?

http://www.ebay.com/itm/380575052690?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[gray1622]

That seems a little high. I bet an muffler shop can make you some. I really want do a kit like this one day with t5 turbo.

 

[JoshK]

Bam
http://m.summitracing.com/parts/wlk-41726

 

[LTHLCHRG]

I am running a comp 8484mm turbo with a 4r70w lentech strip terminator

 

[gray1622]

Sweet. Can't wait to see the pics. I have had good luck with the walker clamps I bought. If you need V bands look at thesehttp://m.summitracing.com/parts/ppe-517031000. So are you changing your mind about keeping your current system JoshK?

 

[JoshK]

Oh yeah. If someone wanted my single kit I would rip it off. Already ordered a comp7879 with a 3.5" v-band

 

[gray1622]

So do you have to remove the ac because of the down pipe or because of flipping the headers?

 

[JoshK]

I was thinking of using these. Only need one side but haven't found that anywhere. It is 2.5" right?

http://www.ebay.com/itm/380575052690?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

Bam
http://m.summitracing.com/parts/wlk-41726

Well apparently the ball joint is 2.25". I ordered the parts linked in the second quoted post above. Got them today and they do not fit the manifolds. I figured it was 2.5" since that is the size of pipe used on the on3 turbo kits for the primary pipes before the merge. This is the part I should have ordered I guess.

http://www.summitracing.com/parts/wlk-41725

 

[Sonicblue_s197]

I need this...

 

[JoshK]

I did email jpc about this turbo kit this week. My reply email stated that they didn't build this kit anymore, but they could schedule my car in their shop to fab a kit