KABOOM! Now off to Brenspeed for a B326 stroker!

[saleen07gt]

Perhaps you are correct JP08GT, maybe the M90 is choking his 326.

 

[JPO8GT]

Perhaps you are correct JP08GT, maybe the M90 is choking his 326.

You we're also correct on higher compression n/a big bore Stroker 3 valve motors make near the same power.
Trust me the m90 is almost a choker on a nearly 5.4L engine thats why you dont find any m90 blowers on 5.4 liter engines.



Sent from my DROID4 using Tapatalk 2

 

[JPO8GT]

This 3 valve kit will fill them cubes very efficiently...

Sent from my DROID4 using Tapatalk 2

 

[MexGT]

Perhaps you are correct JP08GT, maybe the M90 is choking his 326.

Maybe? The M90 is a 90 cubic inch SC unit ... AKA 1.475 lts of displacement.

I'm thinking the blower is barely "pushing" any air, more likely just feeding the 326 regular air needs lol

 

[Dillon Dollar]

When will the TT KIT be ready

Sent from my SPH-L900 using Tapatalk 2

 

[JPO8GT]

There already available through turbo horsepower Jim Napier.
There offered for 3 valves in a few diff size turbos i think 61-67 or 70mm maybe as small as 57 -58 can't remember clearly but they have some twin 67mm turbo setup with a 302 ci 3 valve running 1248 rwhp. But they have setups to meet whatever power level you desire medium power to large power... turbos are so sicko tempting! If you want contact info pm me.
Im thinking with my cubes heads and turbo cams you could see 1300+ crazy hp with the larger 67s stupid sicko..
Sent from my DROID4 using Tapatalk 2

 

[Timmbo]

Timmbo I have a set of silver bullet oem 17x8 wheels i like how u stated u had them widend i bought from brenspeed with mt 26x11.50 bias tires but would love them for a sleeper look with a mt drag radial..
Who widend the wheels?
There collecting dust now cause i hate the bias ply tires they scare the shit out of me running radials in front & them outback car wants to get jiggy..(sway going down track wot)

Sent from my DROID4 using Tapatalk 2

Weldcraft up in Michigan. They were 250.00 each to widen. I went this route because I wanted to keep it old skool with the bullitt wheels. Aftermarket doesn't offer a wider bullitt wheel without them being deep lip dished. Hate those so I went with Weldcraft.

I don't like to be the one to rain on someone's parade but your results are not impressive at all. I've seen big bore strokers with a little more compression and head work make that kind of power N/A. Something doesn't seem right.

Well the M90 just isn't enough. I know a guy with a built 302 stroker from Brenspeed with his old M90 only getting 420/424 rwhp/tq. So you add my additional cubes and I'm at 444/446 rwhp/tq. Plus its 9:8:1 compression. So yeah it's all the M90. Grab a little balloon and try to blow it up with your mouth. Fast huh? Now go find an inflatable queen size mattress and try to blow it up with your mouth. Same principle.

 

[Timmbo]

Figured I'd put a quick vid up of the car after all the mods are now complete.

 

[MexGT]

Sounds gooooooood!

 

[stephen1371]

Love the sound

 

[Surfstang2020]

Badass


Sent from your moms phone

 

[GoneFord]

Nice! Makes me lust for cams.

 

[69Mach1-409]

Figured I'd put a quick vid up of the car after all the mods are now complete.

 

[Timmbo]

Thanks for all the nice comments. I know there aren't a lot of vert fans here but I appreciate it anyway. I'm just glad to have it running again. Drove it all weekend and still no leaks or smoke issues. Looks like Brenspeed did an excellent job! Being a mechanic myself I normally don't trust anybody, but I'd go back to Brent in a heartbeat. Hopefully that will be next fall for the TVS install, Afco dual fan HE and dyno tune.

 

[BigRis]

Sounds great. I have the TVS2300 and putting out 500hp on a stock 4.6l with DR cams. I would love to see what your car puts out with a TVS on it. I love my TVS set up and want to at least do a B302.

 

[808muscle]

Oh my God that sounds amazing! Holy shit it's good. How different is the tone compared to the stock 4.6?

Your vert is the single best looking vert I have ever seen.....simply awesome.....the paint looks wet. What hood is that? I dig that too.

 

[Timmbo]

Oh my God that sounds amazing! Holy shit it's good. How different is the tone compared to the stock 4.6?

Your vert is the single best looking vert I have ever seen.....simply awesome.....the paint looks wet. What hood is that? I dig that too.

Thanks man. I'd say the tone is very similar but with a little more bass/deeper if that makes sense. I definitely plan on keeping this car a long time. I put a ton of hours into the finish using my Porter Cable polisher over the winter. The hood is a Trufiber A29 hood. I'm excited about upping the boost with another supercharger next year.

 

[Taxman]

Oh my God that sounds amazing! Holy shit it's good. How different is the tone compared to the stock 4.6?

Your vert is the single best looking vert I have ever seen.....simply awesome.....the paint looks wet. What hood is that? I dig that too.

What the hell man????



j/k Timmbo I love it. Who cares about vert haters?

 

[onehotpny]

Now we are going to have vert wars!! hehehehe .. It's all in good fun! you both have very sharp verts!!!

 

[Timmbo]

What the hell man????



j/k Timmbo I love it. Who cares about vert haters?

Right! Thanks.

Now we are going to have vert wars!! hehehehe .. It's all in good fun! you both have very sharp verts!!!

Thanks. It's lonely out here LOL!