Livernois Motorsports Built 298 Stroker and ProCharger Build

Discussion in 'Livernois Motorsports' started by Livernois Motorsports, Mar 14, 2017.

  1. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Another great build coming through the doors of Livernois Motorsports. This time it’s a 2008 Ford Mustang 4.6L Roush for some major upgrades.

    We’re starting with our Livernois Motorsports Pro Series 298 Stroker long block to make a great base to build power and support the ProCharger D1SC.

    Other Mods included:
    Livernois Motorsports 4.6L 3V 9.4 to 1 Pro Series Short Block
    Livernois Motorsports Powerstorm Billet Oil Pump Gears
    Livernois Motorsports Powerstorm Stage 3 Pro Series Blower Cams
    Livernois Motorsports Crank Scraper
    Livernois Motorsports MyCalibrator Tuner
    Livernois Motorsports Custom Dyno Tune
    Livernois Motorsports Powerstorm Stage 2.5 Heads
    Long Tube Headers
    Upgraded Balancer
    FRFP Fuel system
    ID850 Injectors
    McLeod RST Twin Disk Clutch
    Full 3” Exhaust
    And much more!

    The injectors and fuel pumps were replaced for an E85 converison but starting with a 93 octane tune to see how much it will make!

    Stay tuned fro more results!

    For all your performance installation needs, contact Livernois Motorsports TODAY!
    (313) 561-5500
    [email protected]
    www.livernoismotorsports.com

    Edgerly Stock  (1).jpg
    Edgerly Stock 2 (1).jpg
     
  2. jhunt47

    jhunt47 forum member

    117
    0
    Really looking forward to this build
     
  3. bujeezus

    bujeezus forum member

    2,669
    69
    sub'd
     
  4. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Base line testing is done and stock power numbers are in.

    Made: 399whp and 388wtq

    Motor has been pulled today and getting ready for the new Powerstorm Pro Series 298 Stroker!

    Motor Out Edgerly SMALL.jpg
     
  5. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Motor is ready! Waiting on some final components and it will be in the car in no time.

    We double keyed the aftermarket damper and the crankshaft, a service we do here for a couple reasons. We place the second key 180 degrees from stock to ensure the damper does not spin off the crank at the snout. This also helps as a safety adder, to not rely on the stock single key for engagement.

    Edgerly 1 SMALL  (2).jpg
    Edgerly 2 SMALL (2).jpg
     
  6. Gabe

    Gabe Whippled Coyote

    6,914
    207
    Really like you guys, but the name powerstorm ... Not so much
     
  7. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    The Livernois Motorpsports Powerstorm 298 Stroker has made it into the car! We will be adding the ProCharger and some of the other mods at this time, then its off to be tuned! Can't wait to see the power output.

    Motor In SMALL 1.jpg
    Motor In SMALL 2.jpg

    Our custom Livernois Motorsports CNC'd valve covers make a great touch to this build. Some under the hood bling to match.

    Motor In SMALL 3.jpg
     
  8. weather man

    weather man Persistance Is A Bitch S197 Team Member

    13,124
    20
    Nice touch on the valve covers guys.
     
  9. roberts

    roberts forum member

    1,480
    0
    How much one of these motor cost and what's the spec on it!


    Sent from my iPhone using Tapatalk
     
  10. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Everything has been assembled and in the final process before it is ready for tuning! Man that thing is shiny!

    Edgerly Semi Complete SMALL.jpg
     
  11. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    For an official quote and spec on the motor, give us a call and we can put together an out-the-door price!

    (313) 561-5500
    [email protected]
     
  12. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Ready for some custom dyno tuning!

    Waiting SMALL 1.jpg
     
  13. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Made it to the dyno this afternoon!

    3V on DYNO SMALL.jpg
     
  14. Gabe

    Gabe Whippled Coyote

    6,914
    207
    Did you guys cause a storm inside that building?
    A power storm?
     
  15. jhunt47

    jhunt47 forum member

    117
    0
    What a tease where are the numbers.
     
  16. Livernois Motorsports

    Livernois Motorsports Livernois Motorsports

    1,377
    0
    Final tuning and testing is done. We were able to pickup peak to peak an extra 238whp and 129wtq!

    That comes out to 637rwhp and 517rwtq on e85!

    1 Final SMALL .jpg

    2 Final SMALL.jpg

    3 Final SMALL.jpg

    Final Tune 3V.jpg

    For all of your performance installation and parts needs, contact Livernois Motorsports TODAY!

    (313) 561-5500
    [email protected]
    www.livernoismotorsports.com
     
  17. 05stroker

    05stroker Never enough power guy!

    12,955
    36
    How much boost and timing?
     
  18. Racer47

    Racer47 Doesn't have much to say S197 Team Member

    563
    18
    Really!

    Because it looks to me like you picked up about 100 hp at 5300 rpm.
     
  19. 46addict

    46addict 13726548

    1,789
    53
    Curious about this as well.