MAF voltage wire color????

[SLOPONY]

Does any one know what color the mass air flow variable voltage wire is?

I am putting a SNOW water meth injection kit in my buddies car car, and its in no condition to start right now to pin it with a meter and locate it. I need the variable voltage wire that reports back to the computer from the MAF.

Thanks in advance

I did search too, but i don't know if this has been brought up before, or if i used the wrong terms.

 

[JeremyH]

 

[SLOPONY]

does that mean the black wire? or is your post just blank?

 

[SLOPONY]

Note to self, don't use Mozilla!

 

[JeremyH]

LOL I attached a schematic of the maf wires. The maf return signal says its pin 4 (TN/LB) tan/light blue im guessing.

 

[SLOPONY]

Awesome!!! Thanks.

Amazingly I can see it on my eyephone, but not with my pc and Mozilla!

 

[lito]

I think is the LB/RD but to be sure get a VOM and measure it referenced to a ground by pinching it, the one that has about 0.5V-1V at idle and increases as you accelerate it is the one you have to use.

 

[SLOPONY]

I'll have to finish the install, and go from there. The cars apart far enough now as to not be running.