Manley H-beam Rods for 4.6 or 5.0 5.933"

[SSPSTANGBANGER]

Sold

 

[BadPiggy]

Wouldn't the purchaser need to buy new bolts anyway?
To my understanding, the 8740's are a one time use bolt.

 

[SSPSTANGBANGER]

Wouldn't the purchaser need to buy new bolts anyway?
To my understanding, the 8740's are a one time use bolt.

No sir you can reuse them you just need to measure them with stretch gauge not torque wrench.

After a few reuses they wont stretch correctly and are done.
FYI your machine shop torques them to check the big end usually before installing them in the motor anyways. So even a new rod bolt will usually get torqued at least twice.

 

[BadPiggy]

No sir you can reuse them you just need to measure them with stretch gauge not torque wrench.

After a few reuses they wont stretch correctly and are done.
FYI your machine shop torques them to check the big end usually before installing them in the motor anyways. So even a new rod bolt will usually get torqued at least twice.

Logical..and I learned something.
Thanks!

 

[Nsane44]

is this for 7 or 8 of them

 

[SSPSTANGBANGER]

is this for 7 or 8 of them

8 of them

 

[onebadgsx]

Rick. Sent pm

 

[SSPSTANGBANGER]

Rick. Sent pm

Sale pending to Jason

 

[onebadgsx]

Sent pp

 

[SSPSTANGBANGER]

Sent pp

Sold