Motor is gone

[US-1]

It's a Teksid.

Interesting. Didn't I read in this thread somewhere that it is a "Larry_H" engine too?

 

[94tbird]

Could have offered him $500 for the whole car I believe that night about 10pm, and it would have been yours.

honestly I would have agreed.

Crap... I only offered him $450... should have went higher.

Don if your offer was recieved that night it would have been yours

Is that an '05 and up block or a Teksid?

It's a Teksid.

Correct Teksid

I figured all these aches and pains came on after he put on a Kenne Bell blower, so Ill gladly trade him my flawless Saleen and ill start to deal with the problems that he deals with.

Everything was fine on stock motor at 10psi. I sometimes really wish i stayed there

sorry to hear aboout this...just hope that guide did not slip enough to jump timing and bend somthing...

Thats another thing i didnt think of and another thing to worry about, ok $400 take the car

 

[94tbird]

Interesting. Didn't I read in this thread somewhere that it is a "Larry_H" engine too?

Yes Unfortunately it is

 

[GI Joe]

honestly I would have agreed.



Don if your offer was recieved that night it would have been yours





Correct Teksid



Everything was fine on stock motor at 10psi. I sometimes really wish i stayed there



Thats another thing i didnt think of and another thing to worry about, ok $400 take the car

Well I hope not but I was thinking about those cams and I think they are interference cams and hopfully the tensioner held even though the guide slipped.

 

[GI Joe]

dont get me started on that larry *** he stole an 8 rib kit and $500 from me...

 

[US-1]

Yeah...the sheared pins rang a bell. I knew I'd seen that crap before so that's why I asked if it was a Teksid block.

 

[Kevin@PMP]

Interesting. Didn't I read in this thread somewhere that it is a "Larry_H" engine too?

Therein lies the problem...

 

[ZmanM3]

dont get me started on that larry *** he stole an 8 rib kit and $500 from me...

Hey if you lived over seas it would have been a whole engine.

 

[94tbird]

Yeah...the sheared pins rang a bell. I knew I'd seen that crap before so that's why I asked if it was a Teksid block.

What do you mean. IS this common or something?

 

[ZmanM3]

Therein lies the problem...

Ya...

 

[Kevin@PMP]

FYI Larry claims "Ozark Performance" was an LLC so he isn't personally liable, but take a look at the Arkansas Secretary of State's website they are nowhere to be found. So in reality he was operating as a sole proprietor and Ozark Performance was only a DBA so he is personally liable if anyone wants to pursue him legally.

 

[US-1]

Therein lies the problem...

Well...beyond that I can distinctly remember seeing a good number of Cobras equipped with Vortech or ProCharger setups that would shear the pins at an alarming rate. Got so bad that I ended up cutting my own pins from tool steel. Worked pretty well. Lots of time and labor involved though.

 

[ZmanM3]

FYI Larry claims "Ozark Performance" was an LLC so he isn't personally liable, but take a look at the Arkansas Secretary of State's website they are nowhere to be found. So in reality he was operating as a sole proprietor and Ozark Performance was only a DBA so he is personally liable if anyone wants to pursue him legally.

True, but the problem is that I don't believe he resides in the US at this time.

And to be honest, my engine has performed flawlessly so far (well except for the broken timing cover).

 

[akula52]

block

Ron, I hope you don't have to need what I am peddling, But I have a nice 06 block with <2000 mile and gently broke down by PMP. r/rich

 

[94tbird]

Well...beyond that I can distinctly remember seeing a good number of Cobras equipped with Vortech or ProCharger setups that would shear the pins at an alarming rate. Got so bad that I ended up cutting my own pins from tool steel. Worked pretty well. Lots of time and labor involved though.

Got any lying around? lol

True, but the problem is that I don't believe he resides in the US at this time.

And to be honest, my engine has performed flawlessly so far (well except for the broken timing cover).

Hes in the US and still 9in AK. Kevin found him on a chinese immigratio site. Everything he said about lixia and the tae kwon do and all that wasa lie she scammed him and he imigratted another chinese woman into the country

Ron, I hope you don't have to need what I am peddling, But I have a nice 06 block with <2000 mile and gently broke down by PMP. r/rich

I may need it man

 

[Kevin@PMP]

Hes in the US and still 9in AK. Kevin found him on a chinese immigratio site. Everything he said about lixia and the tae kwon do and all that wasa lie she scammed him and he imigratted another chinese woman into the country

He moved to Alaska?

But yes as of at least a couple months ago he was still in Arkansas as he was talking about gas prices in the states on a forum for people getting mail order brides from China.

Edit: And he was talking about the stations locally to him.

 

[US-1]

Got any lying around? lol

I wish. The few I had left were in one of the toolboxes stolen out of the shop in '06. I could build you a few but I'd really suggest going to the new block. I was taking a customer's block and their guides and building the pins to fit each setup. Precise but a pain in the butt.

 

[Kevin@PMP]

Ron, I hope you don't have to need what I am peddling, But I have a nice 06 block with <2000 mile and gently broke down by PMP. r/rich

Yep she came apart gently and looks brand freaking new.

 

[ZmanM3]

Hes in the US and still 9in AK. Kevin found him on a chinese immigratio site. Everything he said about lixia and the tae kwon do and all that wasa lie she scammed him and he imigratted another chinese woman into the country

Hmm, I find that to be very interesting. Interesting that he no longer posts on the forums or answers emails. But its nice to know he is still in the US.

 

[Kevin@PMP]

Hmm, I find that to be very interesting. Interesting that he no longer posts on the forums or answers emails. But its nice to know he is still in the US.

He wants everyone to think he is overseas so they don't know where to find him and so they don't file suit against him.