My dyno results

[GAP]

Just sharing my dyno results from Saturday. I did a lot better then I had expected. Managed 290/311 on my first pull, then 293/314 on my second. I think if my A/F wasnt so rich and the air was a little less humid, I might have gotten a 300hp dyno. Only mods are a C&L racer and CMDP's on a Brenspeed tune. But i'm running a lot of extra timing.

 

[force recon]

how much extra timing, i run more on my bama tune at the track.

 

[NastyStang113]

That's pretty damn good.

 

[jroc07gt]

cmdp's with just a intake???

 

[GAP]

how much extra timing, i run more on my bama tune at the track.

I think i'm at 34 degrees total right now. I have my SCT maxed out on timing advance. I'm getting no detonation with cheap brand 93 octane.

 

[GAP]

cmdp's with just a intake???

Yeah, I was expecting 280rwhp.

 

[usafimj]

Pretty damn good with the mods you have

 

[kyoshosp2]

Not bad i have an 06 auto with C&L racer JMS tune and 29* and pypes violator axle back and made 300/296 and the 298/297 and the dam converter kept unlocking

 

[GAP]

Not bad i have an 06 auto with C&L racer JMS tune and 29* and pypes violator axle back and made 300/296 and the 298/297 and the dam converter kept unlocking

Yeah, there was an auto up there and you could hear the converter unlock at about 4500rpms. It'd give him a weird spike in the graph when it did it. I wonder why the converters do that?

 

[07 procharger]

thats a awsome torque line.

 

[NastyStang113]

Pretty damn good with the mods you have

No kidding, almost a little hard to believe.

 

[GAP]

No kidding, almost a little hard to believe.

Like said before, SAE that'd be like 285hp. I wish I would have ran a baseline first. The better then expected numbers almost makes me want to do cams and long tubes. But I dont think that will get me to my goal of 7's in street trim. The week before the dyno, I managed a [email protected] with a 2.09 60'. A better driver could have gotten a 8.6 I think.

 

[Matt D]

Like said before, SAE that'd be like 285hp. I wish I would have ran a baseline first. The better then expected numbers almost makes me want to do cams and long tubes. But I dont think that will get me to my goal of 7's in street trim. The week before the dyno, I managed a [email protected] with a 2.09 60'. A better driver could have gotten a 8.6 I think.

I ran a 7.85 @86.58 mph in the 8th with my stock internal 05 but with all the suspension and weight reduction.... if you did cams ported heads etc etc you might be able to hit a 7.9 with 17"

 

[NastyStang113]

Like said before, SAE that'd be like 285hp.

I didn't see that in the thread. I looked at the picture quick and can see now after looking at the chopped top that it's STD. It's still good numbers.

 

[kyoshosp2]

yea i heard you can get them locked from the tuner. im gonna look into it