post your JDM/DTM/out of the ordinary style wheels

[antonio1988]

Pretty sure those are actually Varsstoen.

nope, rota grids... every euro/import with money in Miami has them

 

[Implosive_disgorgence]

I really wanted to put enkei rpf01s on my 5.0 but they only make them up to 19s I want a 20" wheel unfortunately

 

[antonio1988]

19s really give these cars the perfect stance, but 20s fill in the wheel well perfectly

 

[BLKBULLITT]

nope, rota grids... every euro/import with money in Miami has them

Is that a joke?

 

[Menes06GT]

Ruff Racing R943s

 

[WILECYOT]

nope, rota grids... every euro/import with money in Miami has them

I don't think rotas has a figment mild enough in the grid for our chassis or do they?

 

[antonio1988]

Is that a joke?

Lol actually it's not haha, next time I head out to a meet I'll try and remember to snap some pics so you can see... For every 100 imports, 50 have them

 

[antonio1988]

I don't think rotas has a figment mild enough in the grid for our chassis or do they?

S197 wheel fitment is almost identical to that of the G35/37 and 350/370Z

 

[GallopingFord]

Personally, I think that the Rota Grids are really good looking. I thought the lowest offset we can get for them is like +20, which sticks out on a 18x10. Last night I pulled out a fitment sheet and was curious to see if I would be able to fit some 18x10 Work Meister S1's on the Bullittt... I love that wheel.... and yeah a lot of imports have them, but it is a great wheel on any car.

 

[WILECYOT]

These are Varstoeen 18x10.5 +22 in the front with an 18x10.5 +30 in the rear.

(Not my car)

 

[antonio1988]

Personally, I think that the Rota Grids are really good looking. I thought the lowest offset we can get for them is like +20, which sticks out on a 18x10. Last night I pulled out a fitment sheet and was curious to see if I would be able to fit some 18x10 Work Meister S1's on the Bullittt... I love that wheel.... and yeah a lot of imports have them, but it is a great wheel on any car.

You could always shave down the hub to make it a +15 offset

 

[ford20]

If I were to do rims I think i would have to get one of these 2

Or the FRPP Boss 302 Wheels

Use this for comparing offsets.

http://www.1010tires.com/wheeloffsetcalculator.asp

Do you happen to know what the offset on a set of factory wheels is?

 

[WILECYOT]

If you shave the hub it's not going to cause the offset to lower, it will actually increase....

SMH

 

[whitedealer07]

what i think about rota's

 

[whitedealer07]

Ruff Racing R943s

-1.jpg[/IMG]

what coilovers are you running?

 

[antonio1988]

If you shave the hub it's not going to cause the offset to lower, it will actually increase....

SMH

You're right, my bad... been out of the wheel game for a while now. I was quite active in it while I had the stang, I was always getting wheels that didn't fit and I would make them fit to look different

 

[LS1EATINPONY]

what coilovers are you running?

Dems bags homie

 

[orangensaft]

what i think about rota's

Ah, there are a few of these pictures floating around out there, and none of them have any story behind them. I've also seen pics of $1000 a piece wheels destroyed in a similar manner. The way I look at it is no wheel is going to hold up if you drift it into a curb.

Rota makes the grids in an 18x9.5 with a +38 which is pretty conservative. Most Z cars run a moderate offset for S197s, but they get aggressive with the offset on aftermarket wheels.

 

[DRock]

what coilovers are you running?

He is on Airlift bags.

 

[whitedealer07]

Dems bags homie

DO WANT!!!