Project Over Budget!

[Irishman]

Here is a parts run down. There are some parts missing that were either fabbed up in the shop or that I forgot about haha.


Fuel Rails
GT500 Fuel system
KB 17.5V Dual BAP
Fuel Line Fittings
Fuel Injectors #60
Built 302 Short Block JDM302E
Motor Mounts
FRPP Head gasket kit
ARP Head bolts
Ford Lower Gasket Kit
VCT solenoid seals in both valve covers
seals for the heater tube
Spark Plugs
Oil Drain Plug
Ford Cam Phasers (pair)
Ford Cam Phaser Bolts (pair)
Ford Timing Chains (pair)
Ford Bell Housing Dowell Pins (2)
pre 2005 (metal) Chain tensioners
Chain Guides
Ford Front Cover/Rear Main Dowell Pins (4)
Valvoline VR-1 10w30 non synthetic oil
Oil Filters
Gt500 Oil pump with billet gears
Gears 4.10 FRPP
Gear install kit
Competition Engineering Driveshaft Loop
Rear Diff cover
SCT Xcal 3
8rib belt kit
Comp Cams 127350
Springs 26113-24
Retainers 700-24
Coolant Overflow tank
FRPP Intake Manifold
belt Tensioner Thumprrr
TR6060
McLoed Twin Disk Clutch
McLoed Steel Flywheel
Coast driveshaft
GT500 Throttle body
Throttle body spacer BBR
IW 10% overdrive pulley
Vortech 3.15" pulley
Vortech Mondo Bypass Valve and Flange

 

[sprchrgd s197]

That's "SOME STUFF" you have there for sure!! That's nice man. I bet that mondo sounds G-O-O-D, huh. I wanna hear it bad. I was thinking of going that way. I heard a red race valve at my tuners shop week before last and I loved how that sounded. Post vid when you get it back.

 

[Irishman]

yeah its got "some stuff" on it haha. Its an addiction that got out of control. I'm hoping the Mondo sounds good just not sure if it will be too loud or not. I will get some video as soon as I can.

 

[sprchrgd s197]

Cool, I'm sure you'll love the mondo though.

 

[Towelly]

Wow... Its like my dream build... very awesome. Can't wait to see it done.

 

[Irishman]

I picked the car up this morning and all I can say is WOW!! I will have to upload the dyno graph but I think it was 626whp/500 something tq. Drive just like stock from light to light but when you get in it she really growls and rips. i took of from a light and my buddy behind me said the whole car looked like it was floating haha.

Thanks again Brenspeed for the great service and taking car of my baby.

 

[sprchrgd s197]

I picked the car up this morning and all I can say is WOW!! I will have to upload the dyno graph but I think it was 626whp/500 something tq. Drive just like stock from light to light but when you get in it she really growls and rips. i took of from a light and my buddy behind me said the whole car looked like it was floating haha.

Thanks again Brenspeed for the great service and taking car of my baby.

Well that's what I'm talking about!! Nice numbers for sure. I know you can't stop smiling. Bet you keep thinking of places to go just to drive it, huh?

 

[Irishman]

Oh hell yeah! What a feeling when you hit it and the whole car lifts up and takes off. I love it.

 

[NjsGT]

Irish, how much boost?

 

[Irishman]

I think its around 16lbs. I will have to check after work and see where the needle goes I need to hook up a camera to watch the gauges so I can watch the road because now there is no time for anything except shifting gears and getting sucked into the seat

 

[NjsGT]

I think its around 16lbs. I will have to check after work and see where the needle goes I need to hook up a camera to watch the gauges so I can watch the road because now there is no time for anything except shifting gears and getting sucked into the seat

Dont ya love how it all just gets so hectic you dont have enough time to check the gauge haha
BTW, hows the mondo sound?

 

[Irishman]

Not as bad as I thought it was going to be, but it is running in bypass so all the air is being directed back into the intake. Its amazing how much power the stock intake will make with all those bends.

 

[NjsGT]

Ya, but you can hear something right? I know the plastic bypass's you couldnt hear unless the hood was open....

 

[sprchrgd s197]

Oh hell yeah! What a feeling when you hit it and the whole car lifts up and takes off. I love it.

That's great!!!! I was sometimes thinking should I get rid of my Novi and get a different blower. But it's a big blower and I'm only at 485rwhp so maybe I'm just not pushing it enough yet to see what it will really do.

 

[Towelly]

That's great!!!! I was sometimes thinking should I get rid of my Novi and get a different blower. But it's a big blower and I'm only at 485rwhp so maybe I'm just not pushing it enough yet to see what it will really do.

This! I'm so glad Bob talked some sense into me.

Awesome results Irish! Can't wait to see videos!

 

[GrnBullitt08]

Nice numbers. Congrats on the new reformed ride

 

[Irishman]

Here is the dyno graph.

I will try to get some video of it this weekend. I have to work so it might be next week, but she moves out.

 

[jmstang66]

Love that Ford Racing intake! Setup looks very clean

 

[SherrodMustang]

Awesome numbers, great looking build.

Love the lift in the garage, if I had something like that....... boy o boy. Need to have one installed when I purchase a new house in the next few years. That is if I can keep the mustang parts from stop coming in

 

[Irishman]

I will post up the finished pics and an idle video tonight