Charlie Sheen
Armed and Hammered
... Most of the manuals for Traxxas vehicles can be found on their website.
Not the older 4804/4810s. Might be able to get one from them via email though, I've never tried.
... Most of the manuals for Traxxas vehicles can be found on their website.
That looks like a Traxxas Nitro 4-Tec judging by the electric starting system. or someone shoe horned a TRX engine and EZ start into it. Speed is 50+MPH but seriously unless your on a flat surface that thing is impossible to control
I have a good amount of experience with those. when I was into those this is what i had:
3 Traxxas T-Maxx
1 Traxxas Nitro Sport
2 Traxxas Nitro 4-Tec
1 HPI Nitro Sport
1 HPI Nitro MT
2 of the three T-maxxes recieved engine swaps, the Nitro mT recieved a complete makeover. new chassis, new shock towers, new suspension, new transmission new engine. that thing was a beast.
Ill help you out the best I can
but im 99% sure that is a Traxxas Nitro 4-Tec, looks like a first generation with the TRX Pro .15 Engine.
That looks like a Traxxas Nitro 4-Tec judging by the electric starting system. or someone shoe horned a TRX engine and EZ start into it. Speed is 50+MPH but seriously unless your on a flat surface that thing is impossible to control
I have a good amount of experience with those. when I was into those this is what i had:
3 Traxxas T-Maxx
1 Traxxas Nitro Sport
2 Traxxas Nitro 4-Tec
1 HPI Nitro Sport
1 HPI Nitro MT
2 of the three T-maxxes recieved engine swaps, the Nitro mT recieved a complete makeover. new chassis, new shock towers, new suspension, new transmission new engine. that thing was a beast.
Ill help you out the best I can
but im 99% sure that is a Traxxas Nitro 4-Tec, looks like a first generation with the TRX Pro .15 Engine.
I have a Traxxas T-Maxx 3.3 and it is a blast to drive. I have tried everything on this truck. I am on my 11th engine in 3 years on it. I have tried the RB Innovations Supercharger, nitrous, and a combination of them both. The motor on it now has a modified head, sleeve, and piston in it running a higher compression. I have used radar to check speed and it runs in the high 60's to low 70's mph. The only problem is the tires blow apart pretty easy at those speeds.
My newest toy is a Traxxas Slash 4x4 Ultimate with a Mamba motor. With a 6s LiPo it runs somewhere in the neighborhood of 70 mph when it doesn't flip over. When I go racing I throw the motor came with it and go tear it up. The Vilineon system that comes on them is plenty fun with a 3S LiPo also.
Lately I've been working on making a 100mph nitro car, the gearing is there I just need the space lol custom pulleys all around.
The gearing is good for 111mph (math wide) but the amount of time it will take to get there will be a problem I am considering making it two speed now.
Found out for sure that that is what it is 100% !
Lately I've been working on making a 100mph nitro car, the gearing is there I just need the space lol custom pulleys all around.
The gearing is good for 111mph (math wide) but the amount of time it will take to get there will be a problem I am considering making it two speed now.
I've had about 10 different nitro's (Savages, Cen, couple buggies) and a bunch of electrics. I used to race electric stadium trucks (Losi Jrx-T, XX-T, and XXX-T's), but got out of it a lot of years ago. I still have all my stuff.
Lately I've been more into rock crawlers (scale). Less broken parts, longer battery life, can do it just about anywhere.
My Crawler:
![]()
![]()
Very Nice Rig, Tamiya CR-01? ... I've been thinking about getting back into R/C. Crawlers are what have piqued my renewed interest.
Just ran across this thread, and what a coincidence. I built an old RC10 electric years ago and hated it from the moment I got it together. Tons of money into upgrades, batteries, etc. and I would get about 8 minutes of run time. I know things have taken huge leaps in technology, but I just can't bring myself to run an electric again.
So, I'm looking at buying a nitro 2wd truck for 90% pavement running. The new Jato seems like a front runner, but I'm worried about having a finicky little monster. Just weighing options right now - any input?