stainless works catback installed

[drewzx3]

Finally got my stainless works retro chambered catback installed over the weekend. The aggravating part was just getting everything lined up. One of the tips still isnt right. Here is a short clip.
http://www.youtube.com/watch?v=Tb78T83dRTo

 

[limetym]

got the same catback on my car and love the sound. i have the same problem as you though, gona have to work on getting my passenger tip to line up better.

 

[Ivan 5.0]

SW FTW!

 

[drewzx3]

Yep my drivers side is the one giving me problems. Cant wait to get an x pipe.

 

[limetym]

if you get an x that hooks to the factory cats please post a vid. not really a fan of x pipe sound but really the only option right now but i havent heard one yet with our catback. waiting for a prochamber to come out.

 

[COYO TT]

I have a banging on my passenger side when going over bumps but no loose clamps or anything.....bugs the hell out of me

 

[drewzx3]

if you get an x that hooks to the factory cats please post a vid. not really a fan of x pipe sound but really the only option right now but i havent heard one yet with our catback. waiting for a prochamber to come out.

I plan on going o/r x

I have a banging on my passenger side when going over bumps but no loose clamps or anything.....bugs the hell out of me

Mine did when I would turn and all but I put back on the lift and readjusted and everything is fine now except for that one tip being alittle off.

 

[limetym]

had a little banging on mine. it was just tapping the panhard brace. i adjusted it to where there was plenty of clearence then had the exhaust shop just weld on an extra hangar on both over axle pipes and my prob went away. i think the prob is that the clamps dont clamp down tight enough on the pipes and they move around too much.

 

[drewzx3]

had a little banging on mine. it was just tapping the panhard brace. i adjusted it to where there was plenty of clearence then had the exhaust shop just weld on an extra hangar on both over axle pipes and my prob went away. i think the prob is that the clamps dont clamp down tight enough on the pipes and they move around too much.

The 2nd mufflers behind the axle on mine do not clamp down tight enough and it can kinda b moved. Were yours like that?