Tial WG/BOV

[mikeyfitz]

Got a question about the fittings and line to run for them. I have these fittings here on my Tial 38mm WG and BOV.

Now with these, I have found out they are nylon fittings I guess, now what would be needed to fix these to my vacuum line?

Also I picked up 1/4" Vinyl tubing, which Jeremy said may work, but would it work with these fittings? I would do a size check, but I left the WG at my buddies shop and thats like 35 miles away. More of a question with is there a certain type of hose, or would clear vinyl air hose work with those?

Its like the only snag left in my install.

 

[JeremyH]

You answered your own questions you just push the line into the fitting then tug and it locks in place its the same style connections and line used in meth injection kits.

http://www.alcohol-injection.com/en/52-metal

 

[mikeyfitz]

So itll work is what youre saying?

Now I would need to figure how to fix this to my vacuum line.. So confusing when the car and parts arent in front of me lol

 

[GB10]

Yea, like Jeremy said you just use polyethelyne tubing from Lowes or Home Depot with those fittings. Looks like 1/4" and that tubing is rated for nearly 130psi. You should be able to get a T fitting from Lowes or Home Depot that has that style fitting. The wastegate normally goes to the compressor outlet on that brass fitting in your sig. The BOV goes to the intake manifold or anywhere past the throttle body to pick up a vacuum and boost signal.