So I finally got the Raxiom headlights from American Muscle.
http://www.americanmuscle.com/headlight-black-projector-0509.html
I got the non-smoked version to not hinder my light output.
You will need to order some HID kits preferably some good quality ones from The Retrofit Source. I've used cheap eBay ones in the past and they die out soon, colors don't match left to right and flickers all the time.
For the Raxiom you'll need to get the H7 kit:
http://www.theretrofitsource.com/hid-systems/morimoto-elite-hid-system-h7.html#.VTm-ymiCPCQ
Ford cursed is with stupid hi/lo beam H13 headlights so in order to maintain that functionality you will also need to buy this wire harness:
http://www.theretrofitsource.com/co...otocontrol-bi-xenon-harness.html#.VTm_EWiCPCQ
It's direct plug and play, absolutely no cutting/splicing needed and works straight out of the box.
Connect the control box to the battery and find a good ground. Then just connect the leads (all prelabeled) to the right connectors to the HID kit above.
You will need to modify the Raxiom back cover and do some wiring to make look neat:
This is how the back looks with the cover off. Top is an H1 high beam bulb and bottom is the low beam H7:
Enlarge the hole using a Dremel so you can pass through the HID bulb wires:
Also in the pic above you'll see the orange and Black wires. Those will connect to the H1 bulb. The other side is a 9006 style female connection. As seen below:
Then install the igniters to the HID bulb after you've closed it back up:
Mount the ballast to your preferred location. I just double sided to the wheel well right behind the lights:
Then plug all the connectors from the Motocontrol box and you're done!
HIDs stay on when you flick your high beams!
It got dark so no final shots but will post that up tomorrow.
http://www.americanmuscle.com/headlight-black-projector-0509.html
I got the non-smoked version to not hinder my light output.
You will need to order some HID kits preferably some good quality ones from The Retrofit Source. I've used cheap eBay ones in the past and they die out soon, colors don't match left to right and flickers all the time.
For the Raxiom you'll need to get the H7 kit:
http://www.theretrofitsource.com/hid-systems/morimoto-elite-hid-system-h7.html#.VTm-ymiCPCQ
Ford cursed is with stupid hi/lo beam H13 headlights so in order to maintain that functionality you will also need to buy this wire harness:
http://www.theretrofitsource.com/co...otocontrol-bi-xenon-harness.html#.VTm_EWiCPCQ
It's direct plug and play, absolutely no cutting/splicing needed and works straight out of the box.
Connect the control box to the battery and find a good ground. Then just connect the leads (all prelabeled) to the right connectors to the HID kit above.
You will need to modify the Raxiom back cover and do some wiring to make look neat:
This is how the back looks with the cover off. Top is an H1 high beam bulb and bottom is the low beam H7:
Enlarge the hole using a Dremel so you can pass through the HID bulb wires:
Also in the pic above you'll see the orange and Black wires. Those will connect to the H1 bulb. The other side is a 9006 style female connection. As seen below:
Then install the igniters to the HID bulb after you've closed it back up:
Mount the ballast to your preferred location. I just double sided to the wheel well right behind the lights:
Then plug all the connectors from the Motocontrol box and you're done!
HIDs stay on when you flick your high beams!
It got dark so no final shots but will post that up tomorrow.