What is this noise?

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
At first I thought it was a header leak, but car is down on power, seems to shake the rear end pretty bad around 40-65mph at low load, like around 1400-1800 rpm.

Idle is pretty bad, no codes thrown etc. Noise increases in speed with rpm.

http://s1112.photobucket.com/user/jwr5050/media/20130622_231501_zps4f2f9d94.mp4.html

edit: not a great quality vid but you'll hear the ticking faintly, in person its quite loud.

Doesn't seem to be an exhaust leak as this makes the car act pretty damn weird, and stumble/pop on itself while cruising.
 
Last edited:

BruceH

BBB Big Bore Boss 322
Joined
Sep 13, 2009
Posts
13,810
Reaction score
21
Location
Pacific Northwest
That noise at the end almost sounds like a misfire but it's real hard to tell from the video. There are a lot of noises going on.

What exactly is happening and when did it start?
 

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
That noise at the end almost sounds like a misfire but it's real hard to tell from the video. There are a lot of noises going on.

What exactly is happening and when did it start?

Today. No codes.popped up. Drove the car home 35 miles. It revs fine. But the car "vibrates" in some senses under low load.

Hoping.its just a bad plug
 
Last edited:

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
Think I found the culprit, now what caused it is the next question. NGK TR6 at .028. I think I may need to go to BR7EF.

20130623_122048_zps6ba611b6.jpg
 

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
At the time 18psi 93 octane. I wasn't under wot at the time. Nor was I in boost.
 

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
I drove home about 35 miles with this issue. Doesn't seem like its a.major issue.
 

CPRsm

Senior Member
Joined
Jul 11, 2011
Posts
3,043
Reaction score
1
What does the porcelain look like? Could be detonation, plug looks like it has a lot of heat in it.
 

BruceH

BBB Big Bore Boss 322
Joined
Sep 13, 2009
Posts
13,810
Reaction score
21
Location
Pacific Northwest
A borescope would come in real handy about now. Harbor Freight has them for under $100 from time to time.
 

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
Joined
Jul 10, 2007
Posts
40,538
Reaction score
3,341
Location
Long Island NY
Yep. Hopefully you will get lucky but something hit that spark plug.
Yea that's what I was thinking as well.

Jason - did u pull all the plugs?


But at 18# on pump I think the BR7s are a better choice.
 

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
Yea that's what I was thinking as well.

Jason - did u pull all the plugs?


But at 18# on pump I think the BR7s are a better choice.

Yep, I was taking it for a longer drive, so I switched it off E85 for a little while. That and I wanted to run some gas through the system.
 

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
Joined
Jul 10, 2007
Posts
40,538
Reaction score
3,341
Location
Long Island NY
So that was the Only plug that lookEd bad
?
 

Seer

Senior Member
Joined
Mar 5, 2011
Posts
6,516
Reaction score
1
Yep. Not fused either

Spoke too soon

20130623_154240_zps45e79f40.jpg


20130623_155105_zps455bfc27.jpg
 
Last edited:

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top