Wheel specs

[swervo]

Hey guys, I'm getting ready to order a new set of rims soon and just wanted to bounce some specs off you guys to see if it'll work. I'm going to order a set of matte black Forgestar F14s in 20x9 and 20x10s. For tires I want to use 265/35/20 for the front and 295/35/20s for the back. My question is about offset that will clear big brakes and be flush or just inside of the fender. For the rear I'm thinking 45mm would be good, just not sure what the front should be. Thanks

 

[peetiewonder]

you could go +15 to like +30 on the 20x9s depending what your alignment is like.

 

[Mr. Joshua]

It's not my car but.
forgestar f14 Front: 20x9 +40 255/35/20
Rear : 20x11 +52 305/30/20

 

[swervo]

Thanks guys. I contacted forgestar and will be ordering my wheels on the 1st.

 

[stkjock]

FYI - it's not the offset on the clearance of the brakes, it's the wheel cut.

the F14s will be ok as you can see above they are on a Shelby GT500