WTB 2011-13 stock coyote 5.0

[STEVE_POE]

Looking to buy 2011-13 stock coyote 5.0

please contact
[email protected]

thanks

 

[NickS]

Not quite stock, but this is pretty well priced

http://www.s197forum.com/forum/showthread.php?t=81721

 

[MSgt46270]

Ford Racing NMRA Coyote Stock Sealed Engine
Item # MA50346
$6349.99
Shipped - U.S. shipping only, No APO, Ships in 5-7 business days
Product Features

• 5.0L 32-valve DOHC "Coyote" sealed crate engine
• Designed for NMRA Coyote stock class
• 11.0:1 compression ratio
• 412 horsepower @ 6500 rpm
• 390 ft-lb of torque @ 4250 rpm
• 80mm "drive by wire" throttle-body
• Lightweight Aluminum Block

NMRA Coyote Stock Class. Specially designed for the NMRA Coyote stock class this brand new all-aluminum Coyote sealed crate engine is a modern 5.0L 32-valve DOHC V-8 that features Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver over 412 horsepower @ 6500 rpm and 390 ft-lb of torque @ 4250 rpm (with premium fuel).

Built Ford Tough. This Ford Racing crate engine is built from a lightweight aluminum cylinder block that features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. Includes manual transmission engine harness and flywheel.

High Revving Efficient Power. An 80 mm single bore "drive by wire" throttle body in combination with a tuned composite intake manifold provides efficient air delivery and weight savings. The four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction while piston-cooling jets, optimized oil drain-back and windage control improving high-rpm performance.

Application. This sealed 5.0L 32V DOHC Coyote Engine is designed for the NMRA Coyote stock class and is a direct fit replacement for 2011 Mustangs with engine code BG-397-AA. Can also be used in a resto-mod or a custom car build.Technical Note. Does not include vehicle harness, PCM, alternator or engine cover kit.


NOTE: Ships Continental 48 States ONLY. No Canada, APO/FPO, Hawaii, Alaska, Puerto Rico, Guam or Us Virgin Islands.


If shipping to a business, please include the business name. Also, after your order is placed, be prepared to let us know if you will need a Lift-Gate service. You will be contacted via email before your order ships.

 

[STEVE_POE]

Thanks guys , I know about both. would like to find a complete used motor if possible . Maybe someone thinking about going with a aluminator or something.

I found this . pretty good price for new .
http://fordracingparts123.com/index.php?main_page=product_info&cPath=34_35&products_id=519

 

[MSgt46270]

Same one, higher price but with free shipping.

Ford Racing Coyote 5.0 4V 412HP Crate Engine
Item # MA50189
$6299.99 SHIPPED ships US only, no APO, Ships in 5-7 business days

Product Features

• 5.0L 32-valve DOHC "Coyote" crate engine
• 11.0:1 compression ratio
• 412 horsepower @ 6500 rpm
• 390 ft-lb of torque @ 4250 rpm
• 80mm "drive by wire" throttle-body
• Lightweight Aluminum Block

 

[STEVE_POE]

Same one, higher price but with free shipping.

Ford Racing Coyote 5.0 4V 412HP Crate Engine
Item # MA50189
$6299.99 SHIPPED ships US only, no APO, Ships in 5-7 business days

Product Features

• 5.0L 32-valve DOHC "Coyote" crate engine
• 11.0:1 compression ratio
• 412 horsepower @ 6500 rpm
• 390 ft-lb of torque @ 4250 rpm
• 80mm "drive by wire" throttle-body
• Lightweight Aluminum Block

yes that one is free shipping as well. anything over 3500 is free shipping from ford racing.

Thanks

Mike at diversified is free shipping as well.
http://www.buyfordracing.com/products/5.0L-4V-412-HP-MUSTANG-CRATE-ENGINE.html

 

[2005mach1]

I have everything but a block and crank

all good condition used - less the 9000 miles

 

[STEVE_POE]

thanks , I just went with a new motor from ford racing. I now have a complete motor I'm going to sell with a bad # 8 ....lol

 

[Mike K]

I was going to tell you to get a hold of CPR he has one that he is going to be getting rid of.

 

[2005mach1]

thanks , I just went with a new motor from ford racing. I now have a complete motor I'm going to sell with a bad # 8 ....lol

how bad is the block hurt on #8? - maybe I can take it off your hands

 

[STEVE_POE]

how bad is the block hurt on #8? - maybe I can take it off your hands

I have not pulled the head as of yet. Got the motor on a engine stand , rolled the motor over and pulled the pan. Ran # 8 all the way up and noticed some very minor scratching on the clyinder wall. Guessing we broke a ring.

Car was still running fine just started to have white smoke out the tailpipes and we pulled the plugs and #8 was oil soaked. Was just going to try and hone the cylinder and re ring the piston but just didn't have the time.

Ken b is interested in the complete motor possibly if I can come up with a price but honestly I have no clue what it's even worth.

 

[KenB]

I have not pulled the head as of yet. Got the motor on a engine stand , rolled the motor over and pulled the pan. Ran # 8 all the way up and noticed some very minor scratching on the clyinder wall. Guessing we broke a ring.

Car was still running fine just started to have white smoke out the tailpipes and we pulled the plugs and #8 was oil soaked. Was just going to try and hone the cylinder and re ring the piston but just didn't have the time.

Ken b is interested in the complete motor possibly if I can come up with a price but honestly I have no clue what it's even worth.

between $5-$10. Don't worry about checking that price, I'm an expert.