Airborne2000
forum member
- Joined
- Jun 21, 2009
- Posts
- 994
- Reaction score
- 7
ALL DONE!!! finally, work kills my free time in the afternoon usually, but I worked hard and got it done.
the pics cover a few days worth of progress...
I had to sodder the LEDs up together to length, this is really easy to do, I now love working with LEDs.
next I put all the LEDs inside the boxes
the sign on the wood with blue and red sprayed plexiglass behind it.
just the LEDs lit up
If you remember I put magnets on the back part, now I also mouted them to the back brace, I had to cut some spacers out of wood to add the the back part so both the back part and inside back brace magnets locked together tight.
Nest I added wrinkled aluminum foil to the back of the lighting block, this helped a lot to get good bold lighting when its all lit up
the pics cover a few days worth of progress...
I had to sodder the LEDs up together to length, this is really easy to do, I now love working with LEDs.
next I put all the LEDs inside the boxes
the sign on the wood with blue and red sprayed plexiglass behind it.
just the LEDs lit up
If you remember I put magnets on the back part, now I also mouted them to the back brace, I had to cut some spacers out of wood to add the the back part so both the back part and inside back brace magnets locked together tight.
Nest I added wrinkled aluminum foil to the back of the lighting block, this helped a lot to get good bold lighting when its all lit up