WTB 05-09 Harness Connectors

[Flapjack]

I need a black spark plug connector as well as the turn signal and side marker connectors (both sides).

Anyone have a spare harness they could cut up? Willing to pay a fair price, plus shipping. Thanks!

 

[TexasBlownV8]

I have a few various connectors, maybe even a side marker one, unless I sold it (will need to look tomorrow).
What do you mean by "black spark plug connector"?
Anything in here: http://s197forum.com/forum/showthread.php?t=75765

 

[Flapjack]

I have a few various connectors, maybe even a side marker one, unless I sold it (will need to look tomorrow).
What do you mean by "black spark plug connector"?
Anything in here: http://s197forum.com/forum/showthread.php?t=75765

Realistically, I only need the large tan ones for the sides. For the spark plugs, I mean the black, 2-pin connector that clips onto the COPs.

 

[crownaviation]

For the connector on the COP's

The whole pigtail (including pins and a couple inches of wire) they are silly expensive.. like $55.28 at Tousley.

WPT-759 (old)

WPT-986 (new #)

If you can take your broken one apart (not difficult) and reuse your pins inside the connector then just the plastic part is like $5.17 at Tousley. My local asswipe dealer wanted list which is like $16


1F1Z-14489-AA (old # per Tousley)

3U2Z-145411-SLA This should be just the connector and not the whole pigtail..



OEM parts prices are just stupid sometimes.

 

[Flapjack]

For the connector on the COP's

The whole pigtail (including pins and a couple inches of wire) they are silly expensive.. like $55.28 at Tousley.

WPT-759 (old)

WPT-986 (new #)

If you can take your broken one apart (not difficult) and reuse your pins inside the connector then just the plastic part is like $5.17 at Tousley. My local asswipe dealer wanted list which is like $16


1F1Z-14489-AA (old # per Tousley)

3U2Z-145411-SLA This should be just the connector and not the whole pigtail..



OEM parts prices are just stupid sometimes.

Awesome. Yeah, I got the $50 price a while back when I called the local dealer (using a part number from the Ford connector PDF floating around).

What about the larger tan turn signal connector? I can't seem to find just the plastic piece for that.

All of the connectors and pins are present in my harness.... it's just the tabs that are broken. I currently have them safety-wired on.

Sent from my Galaxy Nexus using Tapatalk 2

 

[TexasBlownV8]

Just checked...I must have given the side-marker plugs to someone else, and none of the connectors fit 4.6 COPs. I do have fuel injector connectors, but those are different.
Sorry.

 

[Flapjack]

Just checked...I must have given the side-marker plugs to someone else, and none of the connectors fit 4.6 COPs. I do have fuel injector connectors, but those are different.
Sorry.

Bummer.

Sent from my Galaxy Nexus using Tapatalk 2

 

[Marc s]

I have the side marker plugs/harness out of my car. PM me an offer if you still need them.

 

[silverpoison]

i hace the coil connectors, how many do you need?

 

[Flapjack]

i hace the coil connectors, how many do you need?

Just one.

Sent from my Galaxy Nexus using Tapatalk 2

 

[silverpoison]

cool! i can ship you one tomorrow! ill just cut it from my old harness. $25 shipped? my paypal is [email protected]

 

[Flapjack]

cool! i can ship you one tomorrow! ill just cut it from my old harness. $25 shipped? my paypal is [email protected]

All I need is the connector part. Crownaviation posted the part number for it and said it was only $5 from Tousley. I'll probably call my parts counter and get that, as Tousley will obviously charge a little for shipping.

Thanks for the offer. It's just too high.

Sent from my Galaxy Nexus using Tapatalk 2

 

[crownaviation]

K, dont hold me to it but I think the crankshaft position sensors may be the same as the cop connectors.. dunno for sure.

 

[Flapjack]

K, dont hold me to it but I think the crankshaft position sensors may be the same as the cop connectors.. dunno for sure.

Interesting that some of the connectors are shared. It's always kinda irked me. A good example is the TB sensor and the fuel rail pressure sensor (I think). Then there's those three asshole connectors near the back of the engine (IMRC, head temp sensor, and knock sensors, maybe?). I've completely redone my harness, but still always seem to plug my knock sensors into the IMRC plug. I finally got smart this last swap and taped over the motherfucker...

 

[05stroker]

K, dont hold me to it but I think the crankshaft position sensors may be the same as the cop connectors.. dunno for sure.

For anyone else searching this is correct. Good old Jim still helping me from the other side, saved me $40. Thanks Buddy RIP!