Candyhorse
Junior Member
- Joined
- May 23, 2021
- Posts
- 2
- Reaction score
- 0
I’ve got a drivers side rear blinker that is acting as it is out. I have the plug and play sequentials installed as well. This is a 2013 btw. If I start the car and then unplug brake light harness and plug it back in while car is running then it will work as normal until car is turned off again but if I just get in and go, it will flash rapidly and blinker goes across the 1st&2nd light only. I’ve unplugged the aftermarket sequencers and same thing. Will only work if I disconnect and reconnect while car is running. I’ve also noticed neither of the side markers are working as well and don’t know if it’s related to the blinker issue. I’ve took the fog lights out and replaced with RTR led lighting and had a shop do it for me and those all work well and so did everything else for a month or two so I’m assuming they didn’t mess the wiring up in the front. Any help would be appreciated.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk