wheel lock broken

[pieperz06]

hey how would yall get off a broken wheel lock it is the kind that looks like a flower.

i was replacing all my messed up lugs(never go to NTB) and putting on some better wheel locks and on my last wheel to take off it busted off.

 

[Vapor08gt]

Find a cheap socket that will just barely start to go onto the lock and hammer it on, or you could go to Orielly and get the lug removal kit.

 

[KBBlack06GT]

Find a cheap socket that will just barely start to go onto the lock and hammer it on, or you could go to Orielly and get the lug removal kit.

yup

 

[pieperz06]

that is a problem they look like this

http://www.partscheap.com/Mustang_Anti_Theft_Wheel_Lock_kit_p/f2ly-1a043-a.htm

 

[KBBlack06GT]

that is a problem they look like this

http://www.partscheap.com/Mustang_Anti_Theft_Wheel_Lock_kit_p/f2ly-1a043-a.htm

i had the same ones.. i made em square with a dremel,, be careful not to scrape a wheel if u decide to do that..

 

[thump_rrr]

that is a problem they look like this

http://www.partscheap.com/Mustang_Anti_Theft_Wheel_Lock_kit_p/f2ly-1a043-a.htm

You can still drive a 12 point socket over it and remove it with an impact gun. I removed a set for a friend a week ago. If it's really screwed up you can also weld a 1/2" drive extension to it but make sure you protect the mag and tire from the sparks.

 

[Freaknazty]

You can still drive a 12 point socket over it and remove it with an impact gun. I removed a set for a friend a week ago. If it's really screwed up you can also weld a 1/2" drive extension to it but make sure you protect the mag and tire from the sparks.

+1 push come to shove weld a nut to the end of it , spin it off with the impact