BMW wheels on a mustang?!?!

[justinS197]

Now i HAVE searched the offset threads so im just curious if i wanted to run
a 20x10 w/ 35mm spacing on ALL corners could that be possible with out serious issues ? if any one has ever ran that!

heres the wheel spec:

Size:20 X 8.5" front &20 X 10.0"rear

Bolt Pattern: 5 X 112

Hub Bore: 66.6

Offset:32 mm front& 35 mmrear

 

[stkjock]

our bolt pattern is 5 x 114.3

So no I don't think those will work.

 

[justinS197]

our bolt pattern is 5 x 114.3

So no I don't think those will work.

i found some that are 35mm offset 20x10 with a bolt pattern of 114.3! that worked out great! but i think it should be fine with that kind of offset...

 

[VTXFrank]

Nope, they won't work. Their bolt pattern, as pointed out above, is slightly smaller in diameter than ours.

A +35 offset will work. Your wheels will look a little tucked. Just make sure your hub centric rings are the correct ones.

If you want to know more about offset and what it is/means, you can't get too much better than this article on a Honda Tuning website.

 

[peetiewonder]

5x112 isnt BMW, thats an audi/vw bolt pattern which as stated is wrong. The hub bore of 66.6 is also wrong because our cars use a 70.5 and hubcentric rings still wont save you.

As far as the 20x10 +35 you could run that, but it will be pretty flush so you may have to run like a 255 tire with that setup to reduce rubbing.

 

[19COBRA93]

There's a guy on SVTP who has BMW wheels on his '03 Cobra. They look killer. Don't know what he did to make them fit, but I know they weren't just a bolt on affair.

 

[Daniel Day]

Pics? Where did you find 'em?

 

[peetiewonder]

BMW Wheels definately can be done, that's what im planning for my next set.

 

[justinS197]

Advant Garde wheels
They look like the rtr rims but with more concaveness and they come in a 20 x10 wich was another reason i wanted them, but like peetie said the only ones they make 20s for is audi, the bmws are 19s, and the Only one close for a mutang fittment is for a nissan 370z wich i think COULD work but it might be too much trouble....even with spacers on the rear

 

[Liftedbronco]

have a look at linea corse wheels man. www.wheeldude.com. same stuff. more choices

and its concavity not concaveness. lmao

 

[justinS197]

have a look at linea corse wheels man. www.wheeldude.com. same stuff. more choices

I really dont like the linea wheel since im assuming your talking about the LC818 wheel? I think one of the members on here has them , i might just call advant and ask them, i do like the rota wheels!

and its concavity not concaveness. lmao

Hey

 

[peetiewonder]

Advant Garde wheels
They look like the rtr rims but with more concaveness and they come in a 20 x10 wich was another reason i wanted them, but like peetie said the only ones they make 20s for is audi, the bmws are 19s, and the Only one close for a mutang fittment is for a nissan 370z wich i think COULD work but it might be too much trouble....even with spacers on the rear

If they are 370z fitment spacers will not solve your problem.

I really dont like the linea wheel since im assuming your talking about the LC818 wheel? I think one of the members on here has them , i might just call advant and ask them, i do like the rota wheels!

Linea Corse Wheels are waaaaaaaay better than rotas.

 

[RedMosesSC]

If they are 370z fitment spacers will not solve your problem.

yup, Im running wheels with Z fitment, they stick out past the fender...

At one point i wanted to try and run an M6 wheel on my GT but never got around to finding them and test fitting, would look awesome.

 

[Daniel Day]

Wow, those look really good! Would look sick on your car if you could get them to fit...

 

[VistaStang]

Ever wonder if someone else in the world is doing the same exact thing as you? I was just looking at these and wondering the same exact question just a couple days ago, still have the tabs open as a matter of fact.

I do like that they have better options than the RTR's and I really liked the 18's but they didn't match the bolt pattern so I wasn't sure if they would be worth the trouble. I love the RTR's but I'd rather stay 18's or even 20's to find a good drag radial, along with running a 10" rear wheel.

 

[ArizonaGT]

Just get some RTRs

 

[EBLeon14]

So any pictures of a few S197 with wheels that aren't the most common(I.E: Bullits, FR500, Saleens)

 

[peetiewonder]

So any pictures of a few S197 with wheels that aren't the most common(I.E: Bullits, FR500, Saleens)

I'm running Ro_Ja R2-5 which are the Same as Gram Light 57F Pros... good luck finding those on another s197

 

[EBLeon14]

I've been wondering how my Alloy GT would look with these:

 

[908ssp]

That Breyton wheel is really gorgeous and they make one without the silver strip. Unfortunately they only make wheels for BMWs.