Boost a Pump help

[kyoshosp2]

Well since im almost maxing out the stock pump i orderd a bandaid for now. but it has no instructions for a 2011 gt. I tried calling KB but they never answer the phone. So does anyone know where i tap the pump into on the driver?? i called some shops but no luck there either,

 

[Bad Intention]

Give eric brooks (Brooks speed) he Is pretty good with BP's.

 

[Kingcrabb]

If its anything like the boosta pump for the Focus u just need to find which wire is the power to the pump, cut it, and run the KB in line with it. It has to be AFTER the factory fuel pump control box. On the focus it was a green and orange wire.

 

[SD07GT]

Well since im almost maxing out the stock pump i orderd a bandaid for now. but it has no instructions for a 2011 gt. I tried calling KB but they never answer the phone. So does anyone know where i tap the pump into on the driver?? i called some shops but no luck there either,

people are making 525 rwhp with the stock pump how are you maxing it out (LOL)

 

[SlowA$$5.0]

people are making 525 rwhp with the stock pump how are you maxing it out (LOL)

I'm assuming he has a power adder of some sort. The stock pump is good to right at 600 rwhp.

 

[jsnyng]

I'm assuming he has a bolt-on of some sort. The stock pump is good to right at 600 rwhp.

Fixed it for you according to your own reasoning.

 

[kyoshosp2]

Bingo.. im on the edge now and will be over the edge next week lol

 

[Trav4011]

Eric? If that's who I think it is, he has a Vortech on the car..

 

[SlowA$$5.0]

PM Twinscrewgt, he is running a BAP.

 

[kyoshosp2]

Eric?? could be lol yes i do and at 5#s im making awsome power. next week is 7#s and meth and boss intake

 

[SlowA$$5.0]

What do you have that's only making 5 psi?

 

[Twinscrewgt]

http://mustangforums.com/forum/2005-2011-mustangs/441593-kenne-bell-boost-a-pump-install-w-pics.html

mine ended up being the big purple wire you need to splice..

 

[Trav4011]

What do you have that's only making 5 psi?

He's got the Vortech kit.. If it's who I think it is.. he's got a base model GT with the blacked out Vortech Si trim kit.

Travis

 

[SlowA$$5.0]

He's got the Vortech kit.. If it's who I think it is.. he's got a base model GT with the blacked out Vortech Si trim kit.

Travis

Interesting, I was pretty sure they were 8 psi stock.

 

[kyoshosp2]

i have no idea what he is talking about

Twin screw thanks man,,

 

[kyoshosp2]

travis pm me your number..u still waiting on ur car?

 

[SlowA$$5.0]

they are 7psi stock and me and my tuner were stuck at mid 550 range then we discovered they sent a 3.8 pulley instead of a 3.5.. that should get me 600 and the intake i heard cough cough will allow me to go to 7800 and another 45-60 rwhp above the factory.. heck i still have stock airbox and manifolds lol ,, right now beats 2.9 whipple gt500s lol

Monty is your tuner?

I assume you are on stock internals correct? If you rev 660 rwhp to 7800 rpm I do believe you pre-qualify for this thread: http://www.s197forum.com/forum/showthread.php?t=54322

 

[Trav4011]

Interesting, I was pretty sure they were 8 psi stock.

Well, I mean, there are different size pulleys.

..they are 7psi stock and me and my tuner were stuck at mid 550 range then we discovered they sent a 3.8 pulley instead of a 3.5..

 

[Trav4011]

travis pm me your number..u still waiting on ur car?

Yeah.. I'm about to ring someones neck over there. It's supposed to be finished today, though. My shop cell is 985-791-9474.

Travis

 

[kyoshosp2]

yep its monty,,