What have you done to your mustang today?

Ok...then I took it the wrong way, thought you were messing with me, I apologize.

Greg Hazlett said:

Ok...then I took it the wrong way, thought you were messing with me, I apologize.

Click to expand...

This still doesn't un-gay him.

UltraKla$$ic said:

This still doesn't un-gay him.

Click to expand...

If anybody knows about gayness, it's Mr StanGAYnator himself, Darren W.

Greg Hazlett said:

Ok...then I took it the wrong way, thought you were messing with me, I apologize.

Click to expand...

No problem man, sorry if I came across wrong ...

Wired in a battery disconnect switch. I relocated the battery to the trunk back in March 2013 and have had the disconnect switch for almost as long. Finally have the easy part done, the switch installed and wired but still need to drill the back panel and the GT/CS bumper cover to install the push-off rod. Keep your fingers crossed for me!

Just ordered some wheels and some tires ... Nitto NT555R 305/35/20's for the back of my car and the GF's Shelby, and 2 wheels that I need to test-fit on the car before I order 2 more

Scott said:

Wired in a battery disconnect switch. I relocated the battery to the trunk back in March 2013 and have had the disconnect switch for almost as long. Finally have the easy part done, the switch installed and wired but still need to drill the back panel and the GT/CS bumper cover to install the push-off rod. Keep your fingers crossed for me!

Click to expand...

Good luck Scott, I messed mine up when I drilled it last month, had to cover my screw up with a custom "push off" sticker lol

Got a good deal on a maximum motorsports gift certificate.

I finally added an HID kit.

Test-fit some new wheels


20x10 Niche Milan on the front of my Brembo-equipped '13 GT.

Everybody said they won't fit, that the spokes will hit the calipers, or that the wheel will hit the strut.
It couldn't possibly fit any better, I so can't wait to get them paired up with some tires and mounted up for real!
No spacer, no rubbing, no clearance issues










Now I just need some tires and 2 more wheels for the back


The rear wheels will soon have 2 of these installed on them:

Those are nice. I looked at then before I went TF on mine.

stkjock said:

Those are nice. I looked at then before I went TF on mine.

Click to expand...

Thanks, I've been eyeing them since before I got the AMR' last spring.

What have I done to my Mustang today? I drove it, enjoyed it, parked it in the garage, and admired it! We have had some unseasonable weather here in northeast Indiana lately. I thought that I had put my Bullitt away for the season several weeks ago. It has been a nice surprise to stretch my Mustang time out a little more this winter.

Jim

Unmodified 2008 Mustang GT Bullitt No. 5039

Took advantage of Lethal's sale and picked up Diode switchbacks and a spare set of plugs.

Waiting for the Viking shocks to come back from warranty work to get the car off the stands.

Greg Hazlett said:

Took advantage of Lethal's sale and picked up Diode switchbacks and a spare set of plugs.

Waiting for the Viking shocks to come back from warranty work to get the car off the stands.

Click to expand...

Here get one of these on there too.

Damn I was thinking that would be fun to put on my ranchero just to mess with my neighbor who is a car guy. But it uses obd2

Picking up my 05 in a bit from getting tuned at the performance shop. It apparently put down 440hp at the wheels, so that doesn't suck.

GallopingFord said:

Here get one of these on there too.

Click to expand...

Picture didn't work, what is it?

slowly but surely getting the new unbusted op rear caliper on, and lower control arms for the rear. need to pull the uca and grease it up as it's getting noisey. thats a project for tomorrow as well as bleeding the brakes

I am l l <----- that close to burning this turd to the ground.