Search results for query: *

  1. calispecial08

    Wtb stuff for engine build

    Would like to buy forged engine parts and possibly a block, not quite sure what direction I want to go yet so let me know what you have.
  2. calispecial08

    Procharger guys come on in!!

    I was hoping I could get some procharger guys to put up some pics of your dyno graphs, really interested in seeing d1 and f1 but would also like to see some p1. I am really interested in seeing what the power curve looks like. Thanks guys!
  3. calispecial08

    Bassani Axle Backs FS

    These belong to a buddy of mine located in marion IL asking $170+ shipping
  4. calispecial08

    WTB forged internals

    Not sure what kind of a build I'm going to go with yet so let me know what you have and how much thanks, Eric
  5. calispecial08

    Wtb shortblock

    Let me know what you guys have, I am looking for either a stock shortblock or just the bare block, also interested in teksid blocks
  6. calispecial08

    Beauty that I spotted the other day!

    Was headed down the main road and caught this out of the corner of my eye in the mall parking lot so I thought I'd snap a couple of pics with the iphone. The guy that owns this owns the local yamaha shop, he also has a modded gt500. will post up some more in a little bit HENNESSEY GT1000
  7. calispecial08

    315s on 20x10 with prokit rub?

    Ok so a buddy of mine just bought a car that has 20s on it with 315/35/20 nitto DRs on them and he is going to sell me the tires for real cheap and I wanted to make sure that I wouldnt rub with them My wheels are concept neeper moxys 20x10 in the rear and I'm lowered on eibach prokit springs...
  8. calispecial08

    Plans for teksid build

    Ok so the boost has become more addicting than meth and I want some more. I am currently only seeing around 7 psi and i have a pulley that should get me to around 10 but I really don't feel like pushing it that far on the stock block. I originally planned on just building a 3v block and then...
  9. calispecial08

    Bassani Race Axle Backs

    175+ shipping These were the first axle backs I had on the car and I have loved them ever since I got them, was just ready to change the exhuast up a bit since this was the only setup I had ever had. I will definitely clean them up. The only issue that I ever had with them was when I first...
  10. calispecial08

    Swapped the Bassanis out for MACs

    Ok so thanks to my good friend Ryan, I was able to swap some MACs on my car to see how I liked them. I had always loved the way that they sounded on youtube but didn't want to buy them and end up not liking them in person. So I was able to swap his set onto my car and I defintely love them and...
  11. calispecial08

    dataloging help!

    Ok so I started the car for the first time today since the s/c install and I was going to datalog with Lito but I can't seem to get my livelink to work. I had livelink 6.3 so I went ahead and updated it to 6.5 to see if it helped and it didn't. The problem is when I click the "begin datalog"...
  12. calispecial08

    Had great luck with my spark plug removal!

    APRIL FOOLS!!!!! Despite having an 08 I got stuck with the old style plugs. Seems I couldn't get any luck with this. Broke all 8 of them suckers. Followed the TSB on every one of them, seemed to do no good. Used PB blaster on them and I let them soak over night..didn't seem to help AT ALL...
  13. calispecial08

    Anyone with a Lisle spark plug removal tool!!

    Will Anyone with a spark plug removal tool rent it to me?? I have an 08 and just assumed I had the newer style plugs till today....I broke the first one and decided to stop until I got the tool.. I have good itrader, lots of posts, I will pay shipping + w/e else I just don't want to have to...
  14. calispecial08

    WTB gauges and pods!

    Looking for single aeroforce, boost sensor and wideband controller or aem wideband gauge, also looking for boost gauge and fuel pressure gauge, will also be needing a gauge pod, I would like either a black autometer center dash pod or any pillar pod, let me know what you have!
  15. calispecial08

    where to buy a BOV from??

    ok I am looking for a tial q 50mm with a 6psi spring, I currently have an order placed with clubrsx.com but when i placed the order they requested copies of the front and back of both my drivers license and my credit card and I don't really feel comfortable giving this info across the internet...
  16. calispecial08

    Breathers on Only passenger valve cover?

    What should I do for the ventilation on the valve covers after putting the blower on? I was going to just put a breather on the passenger side valve cover and leave the PCV tube on the driver side but I read that you aren't supposed to do that? What would you guys suggest?
  17. calispecial08

    boredom at school what do you think?

    yes, i know i have no photoshop skills. Boredom & paint while on break from class. Kinda wondered what my car would look like wrapped in gloss black. what do you think yes or no? the stripes are flat black so I was unsure as to whether the gloss black would still look fine with the flat black...
  18. calispecial08

    Polished Injen Powerflow CAI

    looking to get $200obo + shipping also comes with the 2 clams that hold the coupler that connects the throttle body to the CAI they just weren't in the pic.
  19. calispecial08

    Do you think I'll have too much boost?

    Ok so I have been researching and I have seen people's HP numbers but I am wondering how much boost you guys think I'll be making with my mods. Vortech v2 si 3.33 pulley A2a intercooler Frpp hotrods Shorty headers O/r x 39lb injectors And will be getting a fuel pump setup from Jeremy...
  20. calispecial08

    A2A kit with bov pipe

    on3 bar and plate intercooler with 2.5" piping, one pipe has flange to fit a tial 50mm BOV, comes with all needed clams and couplers, comes with 2 2.5-3" couplers also. This could be a great kit for someone piecing together a turbo or wanting to go with a custom A2A kit for a centri. I bought...
  21. calispecial08

    cool craigslist find (1967/09gt500 swap)

    thought this was neat so I figured I would share. http://memphis.craigslist.org/ctd/2762409197.html
  22. calispecial08

    WTB 3.48 vortech pulley

    If anyone has a 3.48 vortech/paxton pulley that they do not need and would like to sell please let me know! Thanks, -Eric
  23. calispecial08

    Sway Bar Delete on a DD??

    Ok guys so I am thinking about buying a UPR sway bar delete in order to clean up some more room for my intercooler piping. I have heard both sides, that when removing the sway bar it becomes extremely noticeable and I have also heard that it is not that noticeable when removing the sway bar...
  24. calispecial08

    Eric's(calispecial08's) Winter '11 Build Thread!

    Ok so the time has finally come for me to get blown! :clap: I bought Greg Hazlett's Vortech V2 Si head unit and I am piecing together the rest of the kit. I will post more as I begin ordering the rest of the parts. Here are some pics as she sits now!
  25. calispecial08

    The Exhaust Setup Thread

    okay, so i figured why not try to get everyone to compile their exhaust videos into one thread since most of us end up going through at least a couple of different setups before we find that one that we are in love with. Post a vid and list your exhaust setup! I'll start Pypes shorties, pypes...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top