Search results for query: *

Anyone know where this ground lands. One end is the red…I think the other end is on the back of the drivers side head but not sure.

Bought the wrong rotors and pads long ago…time to get rid of them. Not sure what all years they fit but the ad for the rotors in my eBay history purchase says 2015 Mustang GT. Pads are PowerStop Z16 Evolution. $100+shipping

Hooked the battery up today (been about 8mths prob) and the headlights, dash lights, and overhead lights start blinking (seems to be a pattern to blinks, very dim) no key in ignition and there’s a beeping pattern. There’s a red indicator light blinking on gauge cluster also….car with pad lock...

I’m wanting to replace the brake line from the brake booster to the proportioning valve (think that’s what it’s called) but don’t know the size…? I’m adding line lock. Wanting to make a custom line from the booster to the solenoid, then from solenoid to prop valve. Can I use the same style...

Currently all the fluids drained from my car. I can easily remove the radiator. I’d like to flush it and move it forward if I can. Anyone have a good write up or vid on how to move it forward? Buddy suggested I remove the radiator, fill it with CLR, shake it around a bit, drain, flush, good to...

Been stuck on this part of my build for awhile…time to make a decision I guess! I’m needing to upgrade the wastegate, or so I’m being told, looking for options. I took the piping to a fab shop and this is what he said…”what needs to happen for proper wastegate operation is all the piping (yellow...

I’m running a return style fuel system. I don’t see why I would need the factory fuel pressure regulator but it might give info I don’t know about. One future thing I want to do with my car is wire the radio to the OBDII port to receive any data I can, then display that data on the radio. I’d...

Is there anything I should do to this section of my turbo kit before I take it to shop for welding? In a vid I watched a guy said “for better gate control and eliminate boost creep cap the red section and dump the yellow to atmosphere”! I have no clue about any of this lol I want to do it that...

……should I wrap the hot side? Getting different info searching around. Says it helps performance but holds heat & moisture, warping & rusting the pipe. Wanted to see what most people where doing..thanks

Which one of these do I need to run to my vacuum block…yellow or red..or does it not matter?

Do I need to install these bump stops on the struts? Never done struts on an S197, don’t recall them being on my 2002 but different setup. Running Eibach Prokit springs

About to go get a 30pk and throw firecrackers at this POS for the rest of the day! Went to mock up some turbo piping and instructions mentions piping around a-arms so I decide to mock those up 1st…sounds easy!! The bushing won’t slide into the k member bracket. I’ve tried hitting it in and...

Installing the flywheel & clutch tonight, hoping for tranny tom!! Trying to torque down flywheel bolts but she’s spinning..kinda expected but best way to stop? Tried wedging wrench in teeth with slight Jack pressure but motor just lifts. Figure this breaker bar on crank bolt will do the job but...

Hoping to get the motor in tom morning, few things running around in my head. How much weight would you’d say is on the 1000lb rated engine stand now? I’d like to install the headers and everything I can now but don’t want to push the engine stand limits. When I install the headers should I use...

I’d like to replace the 180k coil packs and need to get some cheap spark plugs to start tuning with. Figure the stock Motorcraft DG511 coil packs will be plenty….but dunno? And what’s a cheap spark plug I can use…if those exist anymore. 1st pic is MAS coils & Motorcraft plugs…dunno anything...

Need to replace the hangers for the exhaust, looking for suggestions. Still have the brackets/rubber on the body so I just need to replace hangers on pipe….or whatever's best? Seeing 2 main types but just started looking…need to confirm pipe size. 2006 ROUSH. I like the way it sounds, whatever’s...

I need to replace one of the bolts on my timing chain guides. I can’t seem to find the bolt. The bolt in the 1st pic is too long. Im trying to find the shorter bolt like in the 2nd pic. Anyone have info, part #?

Woke up this morning & said “Forget work, I’m gonna build a longblock!!” Talked to Lito, got lockouts yest….here we go!!! I take the 1st phaser off the cam, and start removing plate bolts….but “WAIT””, there’s pressure on two of these bolts…ahhh screw that, yank them out!!” Then a POP and that’s...

With no timing chains attached can I put a socket on the cam bolt and rotate the cam? I’m trying to do the timing chains but worry if I spin the cams to line up the dots a valve may hit a piston. I don’t really see that happening but have no clue so thought I’d ask

Hoping APR lube comes today so I can complete longblock build. Preassembled last night & ran into an issue…I think? I was putting the lifters in oil and priming them…I thought it’d be a real smooth action but it’s not. Some seem a lot smoother than others. I have 2 so far that aren’t smooth at...

Was reading another thread and learned there’s a difference in the 05-06 & 07-09 (think that’s right years) spark plugs. I didn’t know that when I ordered these so I’m wondering if I got the right ones? I can just take one out and test fit it but I’m also wondering if I got the right heat range...

I believe these are called cam phaser solenoids…? I’m trying to reinstall these but can find any torque specs. I can find vids on replacing the solenoid itself but nothing on the part of it I’m trying to install. Trying to find torque on bolts in red

Got it installed correctly…I think. Wanted to get a check. Found an old pool fitting to help with the job lol. Does the seal sit flush or recessed? Should I knock it down more? Repainted cover.

I need more ARP assembly lube for the head studs and ARP cam tower bolts(do I use that on those?) so I was gonna get this. Question is can I also use this ARP lube on other stuff like for installing the keepers, valve seals, etc or is it not for that really? Everyone says “add grease to keep the...

Was in the box with my pistons, rods, rings, & bearings. Machine shop said it is a bearing they replaced…doesn’t look like a bearing to me.