Search results for query: *

^^^^^^ I agree with this guy. I got mine dyno tuned after I installed delete plates. I drove my car fine for a couple of days before I got a retune. My dyno tuner told me the same basic thing, that they only turn off the actuator input. I did a couple of other things all at once which is why I...

I just installed the JLT on my 05 GT and it seems to be working OK but I did several things at the same time to save on the dyno time so I can't isolate what HP I got from what. It seems really well made but I am concerned at how HOT the main delivery tube gets. I tried to make a heat shield...

What is the amount of increase in MAF size compared to the stock?

You will need to do some minor fabrication to make a shaker work with aftermarket CAIs. Here's mine with a JLT CAI. And with my previous K&N CAI.

After you remove the blades and shafts you will need to plug the holes between the ports. If you only want to remove the blades and leave the shafts, all you need to do is remove the rivets holding the blades to the shafts. Look at these photos >>>--->...

Wow, that is a really decent price in 2010.

I got mine on eBay in 2007 for under $500 NIB. You might need to shop around and bid on several to get a good price on eBay. You can Google CDC shaker and query for retail price. I love my shaker and have had no problems in 3 years. It is a pretty simple install with proper tools and...

The links on my early 05 are like the one on the right with the plastic pieces.

Nice ride Sir, congrats.

It will not fit without some serious fabrication, as far as I know.

That is stock cams, stock heads, stock 5R55S, 4.11, AL DS, MT Drag Radials, custom 93 tune. I now have HR Cams, LT Headers, LCA lowering bkts, CMCV Deletes, 60mm TB, and larges JLT CAI I hope to get it track tested soon, but it's so blistering hot and humid around here I don't expect better...

I had Hot Rods installed and was told the cams really need LTs to perform correctly. Two weeks later I went back and had long tubes and Hi Flo cats installed and it was a whole new car. The cams really came alive in performance with the LTs. Best of luck to you... you will like the HR cams.

Great looking numbers! I hope my car looks as good when I get retuned and dynoed next week.

And the answer is.... I was going to have Hot Rod cams and LT Headers installed which would require a tune on the Dyno at $300 a pop. So the day before I had the work done I installed CMCV deletes, and the throttle body at the same time. At the shop I also upgraded from a K&N CAI to a larger...

Great looking car! Congratulations.

NO... If you have the MSVT / GT500 TB, the throttle motor assembly is "larger" than the stock Ford TB. So your stock electronics will not fit. The new GT500 TB already has the electronics attached from Ford BTW. I recently installed a GT500 TB on my 05 GT so this is all fresh in my mind...

Other things to consider for future mods would be a Hi Stall converter for the transmission, an aluminum one piece drive shaft, long tubes and cams.

The GT500 TB is what I installed on my 05 Gt stock manifold. No spacer needed and the 60mm butterflies clear the manifold opening with no problem. You will need to spend about 20-30 minutes elongating the mounting holes (with a rat tail file) about 3/16" to eliminate the need for a spacer. The...

The pics are a little OLD but what the hell... Recent but track untested mods. Hooker Long Tubes PI 3K TQ Converter TCI Shifter Hot Rod Cams GT 500: twin 60mm Throttle body JLT CAI CMCV Deletes LCA relocates SLP Line Lock Pypes HF cats Pypes X Flowmasters Sun SuperTach (Geezer retro)

I don't think Ford makes a direct bolt in replacement shaft for the S197. Most of the aftermarket shafts I have seen are not direct bolt in either. They are usually installed with a new pinion yoke, or some use some sort of adapter to make it fit. You might want to search Google, as...

CDC's customer service is excellent, send them an email and ask for an opinion or a fix or advice. CDC will also sell shaker parts if you do damage something trying to modify. Best of luck take pics & keep us posted.

Adding the Long Tube Hookers after I had Hot Rod cams for about 3 weeks the cams really came alive compared to the FRPP shorties I had before. But I would imagine any good LT would get similar results.

I am using Hookers and love them on my 3V. I got mine from from these guys. http://www.lmperformance.com/6589/73.html They were $599 for the ceramic ones, and I think the black ones are $539. Easy to install I am an Old School "old Geezer" so Hooker was my first choice based on past Hookers.

They're still $749 Shipped at CJ Pony Parts.

Hmmm... Didn't you say ...and you don't think that's being somewhat of an asshat yourself?