2005-2010 Kenne Bell 2.6 kit

[Jeffk]

Sold sold sold

 

[Jeffk]

Damn flash washed out my username and stuff on the paper. Sorry mods.

Here's a different pic that I took last night. If this isn't sufficient please lock it up and I'll take more tonight.

 

[TexasBlownV8]

Good price on a complete setup.

...you might want to mention that the system is intercooled and includes the appropriate components, such as coolant bottle, heat exchanger up front, etc.

This is the same KB unit that I use; it's capable of pushing over 18 psi of boost with a smaller pulley.

 

[Jeffk]

Good price on a complete setup.

...you might want to mention that the system is intercooled and includes the appropriate components, such as coolant bottle, heat exchanger up front, etc.

This is the same KB unit that I use; it's capable of pushing over 18 psi of boost with a smaller pulley.

Thanks Mike.

Forgot about those details.

Also has a 20A Boost-a-pump.

I also have the install manual in a binder with each page in a page protector.


This is a $5800 kit from Kenne Bell.

 

[badcs]

How many miles are on the supercharger? Was this your daily driver?

 

[Jeffk]

How many miles are on the supercharger? Was this your daily driver?

About 22K on it. At one point it was my daily but it hasn't been for the last 6 months or so.

 

[bakerjd]

You might hear from me soon. What parts do you need to have shipped your way to swap it out for shipping. I know you'd obviously need an intake/CAI but what else?

 

[TexasBlownV8]

You might hear from me soon. What parts do you need to have shipped your way to swap it out for shipping. I know you'd obviously need an intake/CAI but what else?

Needed to swap: intake manifold with imrc plates or delete plates , stock airbox with stock maf, large tube from airbox to throttle body, small hose from tube to passenger-side valve cover, driver-side hose from valve cover to intake manifold, possibly the hose from the evap solenoid on the driver front fender to the intake, stock fuel injectors, stock fuel rails (swap yours with his for getting the crossover-fule-hose the right length), coolant crossover on the front of the block behind the alternator, pcm mounting bracket, BEC mounting bracket, washer fluid reservoir with pump.

 

[Jeffk]

Needed to swap: intake manifold with imrc plates or delete plates , stock airbox with stock maf, large tube from airbox to throttle body, small hose from tube to passenger-side valve cover, driver-side hose from valve cover to intake manifold, possibly the hose from the evap solenoid on the driver front fender to the intake, stock fuel injectors, stock fuel rails (swap yours with his for getting the crossover-fule-hose the right length), coolant crossover on the front of the block behind the alternator, pcm mounting bracket, BEC mounting bracket, washer fluid reservoir with pump.

You're awesome!

I think there's something to do with the heater hoses too.

Josh, if you decide to do it i will send you the teardown portion of the installation instructions.

 

[stang67]

I would be interested in the throttle body if it doesn't sell

 

[bakerjd]

I'll keep you posted. I want to, but might get killed by the future mrs if I buy this lol

 

[UltraKla$$ic]

How come these things weren't this cheap when I had MY 3V?!?!?!?!?!?!?!?

A used KB was $5-$6k!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

$3500?!?!?! woooooooooooooooow!!!!!1

 

[Jeffk]

I'll keep you posted. I want to, but might get killed by the future mrs if I buy this lol

Would taunting you about letting her
call the shots make you do it anyway? Lol

How come these things weren't this cheap when I had MY 3V?!?!?!?!?!?!?!?

A used KB was $5-$6k!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

$3500?!?!?! woooooooooooooooow!!!!!1

I know right? Pretty damned cheap...why no buyer yet?



Sent from my SCH-I535 using Tapatalk

 

[Jeffk]

I would be interested in the throttle body if it doesn't sell

I'll let you know but its pretty much spoken for.


Sent from my SCH-I535 using Tapatalk

 

[bakerjd]

Would taunting you about letting her
call the shots make you do it anyway? Lol
Sent from my SCH-I535 using Tapatalk

She's not calling the shots...it's a matter of trying to explain to her that a KB doesn't mean more to me than buying her a ring after 5 years if I bought it LOL...I wouldn't win that battle.

 

[Jeffk]

She's not calling the shots...it's a matter of trying to explain to her that a KB doesn't mean more to me than buying her a ring after 5 years if I bought it LOL...I wouldn't win that battle.

Ahhh...what's another year? Lol

I understand, let me know what you decide

 

[bakerjd]

Ahhh...what's another year? Lol

I understand, let me know what you decide

Will do. I really do want this kit so I'll see what I can do. Wouldn't need the TB or handheld as I have them already. I'll keep you posted.

 

[Jeffk]

Will do. I really do want this kit so I'll see what I can do. Wouldn't need the TB or handheld as I have them already. I'll keep you posted.

Sounds good.

 

[nunjabusiness]

Will do. I really do want this kit so I'll see what I can do. Wouldn't need the TB or handheld as I have them already. I'll keep you posted.

That will be one hell of a nice christmas present to yourself.
Wish I had an extra 3 or 4K freed up, I would be on this like stink on ... well, you know.

 

[Jeffk]

It would be a sweet christmas present...for someone.

Sent from my SCH-I535 using Tapatalk