Chassis to Fuel Rail Fuel Feed Line

[WNYGT5-0]

Looking to replace the fuel line for my project car. I must be searching for the wrong part because I’m having trouble coming up with an oem part #. I see a braided conversion kit that is offered but I’ve read that some of these quick disconnects leak. But I may end up having To go that route... TIA

 

[RED09GT]

I have a stock one that is just sitting in my garage.
If you are interested, I'll see if it can fit in a small box and send it for the shipping costs. I'm never going to use it again.
I do live in Canada so it might be $15 or so to ship it.
I'll have a look when I am home tomorrow evening.

 

[WNYGT5-0]

 

[JeremyH]

Never seen it leak, its double o-ringed inside. No other option for stock rails other than that springlock style connector. Why would you want/need another stock one for though?

Here is an OEM one next to an aftermarket an adaptor version.

 

[RED09GT]

He's swapping from a V6 so I figured he needs the line going from the hard line to the fuel rail.
I think I still have the adapter as well, switched to the Fragola fitting (like Jeremy's picture above) when I went to a -8AN line.

 

[freeloader1969]

Here's the kit I used last two years ago when I did the swap. No leaks whatsoever.

https://www.americanmuscle.com/russell-fuel-line-kit-0510gt.html

 

[JeremyH]

S&H has a similiar kit, they can custom make it for the setup as well.

https://m.facebook.com/story.php?story_fbid=948419602021542&id=229119453951564

 

[WNYGT5-0]

Thanks guys, looks like that the way I’m leaning. Was just looking to get up and running. You ask at the parts store and they look at you like a idiot and point to rubber hose and clamps.

 

[MADGT]

Here's the kit I used last two years ago when I did the swap. No leaks whatsoever.

https://www.americanmuscle.com/russell-fuel-line-kit-0510gt.html

I am using this kit right now...rock solid!

 

[RED09GT]

I found my stock line but the connector that goes on the body side has been crushed slightly, it probably got stepped on. It's not worth the price of shipping anymore. Too much risk of a fuel leak so I can't send it like that.

 

[RED09GT]

 

[WNYGT5-0]

I found my stock line but the connector that goes on the body side has been crushed slightly, it probably got stepped on. It's not worth the price of shipping anymore. Too much risk of a fuel leak so I can't send it like that.

Thanks for having a look, I’ll just order the conversion kit no big deal. Appreciate you taking the time...

 

[sportinawoody]

i have all this stuff if interested ( stock line, aftermarket with fittings, and even the braided stuff to run from the stock rails all the way back behind the filter and a solutions one billet filter) as Ive been running an entire fore fuel system for a while and all this stuff is on the shelf. save a little money and get this stuff out of my way