cometic 94mm head gaskets 4.6 or 5.4

[sportinawoody]

brand new but package has been opened. part# C5503-030 & c5502-030 .030" thick. cleaning out parts little by little. 200 shipped

 

[BadPiggy]

Woody?
Isn't the 94mm bore a 5.0 iron block?

I did a quick google search for "94mm Siamese bore cylinder"...check this description out...

http://www.jegs.com/p/Ford-Racing/F...-Modular-Boss-Cylinder-Block/2877140/10002/-1

 

[sportinawoody]

these still can be used on the aluminum block from what i have been told. anyone else have any personal experience with these ?

 

[sportinawoody]

just double checked, these will work on standard 3v aluminum blocks with no issues but should be accounted for when determining compression ratio

 

[sportinawoody]

bump

 

[my07silvergt]

How much would this affect CR? And pardon my stupid question but would it increase or decrease CR?

 

[lito]

94mm is their standard bore size, they don't make 92mm as the felpro/stock ones.

0.030 is a little thinner than stock which is usually around 0.032-0.036 but they have a bigger diameter, ending CR is close as an stock one.

Big bore cometic are 95.5 or 96mm I don't recall exact numbers..

 

[sportinawoody]

Thanks for clearing that up. In essence, these will work for a stock block

 

[05stroker]

Do you still have these?

 

[sportinawoody]

yes, sittin on the shelf for later use. but its allllll for sale

 

[05stroker]

I decided to wait for the 92mm Ford overbore I have on the way. Good luck with the sale.

 

[sportinawoody]

if they do they do, if they dont, they will be on the shelf waiting for my next project.