I have a new HU (Android off brand) and wired in a reverse camera.
If I have the video cable plugged in the the "Camera" RCA input, nothing happens when I go into reverse or if I select video through the HU AUX option.
If I plug in the video cable in the "AUX" RCA input, the camera works fine when manually selecting AUX in the HU and putting the car in reverse.
I contacted the company and they told me to plug the video cable into the "AUX" RCA input. They also sent me this pic so I could get a visual.
The picture shows a reverse wire in the stereo harness connected to a wire coming off the Video cable. Interestingly, at the bottom of the picture there's a wire going into the video cable which is labeled 12V. Am I correct in assuming the reverse wire in the harness has to be connected to the reverse light to activate the HU to automatically switch to the camera?
I can run it to the SJB, but just checking to see if I'm reading this right. TIA...
If I have the video cable plugged in the the "Camera" RCA input, nothing happens when I go into reverse or if I select video through the HU AUX option.
If I plug in the video cable in the "AUX" RCA input, the camera works fine when manually selecting AUX in the HU and putting the car in reverse.
I contacted the company and they told me to plug the video cable into the "AUX" RCA input. They also sent me this pic so I could get a visual.
The picture shows a reverse wire in the stereo harness connected to a wire coming off the Video cable. Interestingly, at the bottom of the picture there's a wire going into the video cable which is labeled 12V. Am I correct in assuming the reverse wire in the harness has to be connected to the reverse light to activate the HU to automatically switch to the camera?
I can run it to the SJB, but just checking to see if I'm reading this right. TIA...