Ice skating w turbo and mt-82

[CPRsm]

This was 10, 13.5 and 15.5 with air filter and exhaust still on. You can see a restriction starting about 15psi. Dropped the exh and added a pound and picked up 70rwhp lol

This was w the T6. Like it better having slower the spool down a few hundred rpm. You have to actually give the engine a good load to spool the engine. She has a bit more control now with really helps when you start making this kind of power. We can still go the other way w a smaller turbine for those that like that craziness.

Graphs below are all done on 10psi. First is Paxton w torque booster and second is without. Same car, tuner, dyno and E85 as fuel.

https://www.youtube.com/watch?v=DGjax51B6m4





Every trick in the book and the clutch still sticks to the floor. So after some more unrecorded shenanigans customer is pulling the trigger on the auto now. Have some suspension to add, an instant center to move and new tires soon. Time for full retard.

 

[psfracer]

That is a crazy amount of power for a street car on street tires.

On other forums I see threads about how some young guy with his first mustang wants to build a "1000 rwhp street car". Those kids have NO IDEA what they are getting into. No idea.

 

[Doug M]

Very sweet!
Do want a turbo so bad.

 

[kdanner]

That is a crazy amount of power for a street car on street tires.

On other forums I see threads about how some young guy with his first mustang wants to build a "1000 rwhp street car". Those kids have NO IDEA what they are getting into. No idea.

What I see them getting into regularly here is the guardrail, after they make their 11 second pass at 150mph and lose control. Mustangs, Corvettes, GTRs, all of them. Same out there?

 

[CPRsm]

That is a crazy amount of power for a street car on street tires.

On other forums I see threads about how some young guy with his first mustang wants to build a "1000 rwhp street car". Those kids have NO IDEA what they are getting into. No idea.

Yeah, you can hear me ask him not to kill me. But the boost controller does have master controls w a PIN. Stock upper right now lol. When we're done if it doesn't hook we can get more extreme. Do have a customer that hooks from 2nd gear w 20psi. But took more than most are willing to do.

 

[GrabberBlue5.0]

Badass!! I'm jelly, I can only assume that is a built motor?

 

[rcm90]

Damn good numbers! Can't wait to get mine on!

 

[CPRsm]

Badass!! I'm jelly, I can only assume that is a built motor?

Yeah sleeved w billet rods. Auto swap and then we're really going to get foolish

 

[GrabberBlue5.0]

Am I mistaken or aren't the coyotes sleeved from the factory?

 

[CPRsm]

They are, they just aren't thick enough for serious power. After market sleeving is probably, 2-3 times thicker as a minimum? Some sleeves are so thick they actually touch between the bores.

 

[cam101]

That's ridiculous. Nice platform. He is definitely will enjoy.

 

[Dillon Dollar]

Nice

Sent from my SPH-L900 using Tapatalk

 

[TheKurgan]

Yeah I think I'd be scared to do a full boost 2-3 or 3-4 shift with that power too. If he tries to do a powershift, I'd kindly ask to be let out of the car.