Injector connector style

[05gtowner]

A few of my injector connectors have lost their retention lock. I want to replace them but I am not sure what style they are on stock injectors. Anyone know for sure? I am looking on connectorsfast.net

 

[stkjock]

maybe this could help

http://www.s197forum.com/forum/showthread.php?t=30827

 

[05gtowner]

Yeah I saw that in my search but since I updated my phone pdf is not working right so I couldn't view it. I will just wait until I get home. Thank you.

 

[stkjock]

if there is a PN on the connector you should be able to match it to that pdf

they are EV6 - so should be

http://www.ebay.com/itm/EV6-EV14-US...ORD-CHEVY-DODGE-FAST-LS2-LS3-GM-/281819449760

 

[JeremyH]

They are uscar. Referred to as ev6.(ev6 is actually a body style of the injector)

You can find them on ebay cheap.

http://www.ebay.com/itm/EV6-EV14-US...30fc:g:-7MAAOxyVaBSpQ0C&vxp=mtr#ht_243wt_1105

 

[05gtowner]

Yeah I found a set of 8 pretty cheap. I have a missing or ever so slight lean condition under moderate throttle in 4th and 5th. I believe it to be a dirty injector or the connector getting loose. Either that or I have a bad plug/COP. I am going to pull plugs and swap in a set of low mileage factory COPS first then go from there. But the connectors need to be replaced since a few of the tabs are broken so I just needed to know what kind.

 

[05gtowner]

Just installed some HT1's and a low mileage set of factory coils. I also got the EV6 connectors off of fleabay cheap. For future reference here is a link, http://www.ebay.com/itm/301623112036?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT