Installing a paxton novi 2200.

[stretch]

I left it and ran the stud/bolt into it. No problems

me too

 

[gizmo5]

Run the stud in it, done

 

[Bullett]

To those that just got your kits, Ken B will put some hairs on your ass with the tune. Car so far is driving great! Tomorrow we hope to dial it in.

 

[Trousersnake]

Cutting the automatic trans line fluid lines now any tips

 

[Trousersnake]

Do I cut the nylon braided hose right in half?

 

[DSargent09]

Every post you make should include pictures!!!!

 

[Trousersnake]

Can't I'm at my limit of pictures

 

[bigriff85]

You need a gates 100 and you need to change the bottom idler position for a 2.95

 

[bigriff85]

On the bracket whoops hit wrong button

 

[onebadgsx]

Cutting the automatic trans line fluid lines now any tips

I unbolted the trans cooler and ac condenser gave me some more room to cut them right after they turn to head into the cooler then cut them back closed to the trans fittings. Rum new hose

 

[Trousersnake]

Did you have to cut the braided 1/2 inch hose right in half?

 

[onebadgsx]

lund racing tuned paxton car

 

[Trousersnake]

Wishing I knew if you cut this braided hose that came with the kit in half to make room..

 

[onebadgsx]

yes the gates hose use what you need of it to make 2 new hose

 

[bhowardb]

View attachment 41506

Does this pop out with a screw driver

Are you changing your pulley or something?

 

[Trousersnake]

Don't have an impact

 

[Trousersnake]

Thought if I bolted it on the car and hooked up the belt there would be enough tension to break it loose but it just slips the belt

 

[gizmo5]

You need an impact

 

[onebadgsx]

You need an impact

x2...

 

[gizmo5]

Page 17 in this thread

http://www.s197forum.com/forum/showthread.php?t=90500&page=17