I recently installed a set of 2007-09 GT500 rims on my 2005 V6. I noticed that there is a small gap between the tire and the rear fender well that I want to close up. I need to push out the rear wheels on my car to get it to look flush with the rear fender, and I found that a spacer width of "1/4" thick would accomplish the goal. I saw that Maximum Motorsports has the spacers I need, and on their product description it said "Longer wheel studs may be required with these 1/4" spacers". It says “may” not “are” required. I contacted them to get that clarified but I haven’t heard back yet, so I figured I would ask you all. Has anyone here used wheel spacers that are 1/4 inch thick? And if so, did you need to get longer studs, or did what's currently on the car work fine?
Keep in mind, these are spacers that I’m referring to, not adapters. They are just simply placed between the wheels and the brake disk, and not bolted on like adapters are. Link below.
http://www.maximummotorsports.com/14-thick-wheel-spacers-5-Lug-pair-1979-2014-Mustang-P574.aspx
Keep in mind, these are spacers that I’m referring to, not adapters. They are just simply placed between the wheels and the brake disk, and not bolted on like adapters are. Link below.
http://www.maximummotorsports.com/14-thick-wheel-spacers-5-Lug-pair-1979-2014-Mustang-P574.aspx
Last edited: