MGW Mt-82 Shifter bushings.

[Tri-bar]

Just got done installing the MGW MT-82 shifter bushing and a two post bracket from Barton. I have a Barton shifter. I have nothing against the Blowfish bracket. It just made to much noise, "bag of marbles thing" even with the new gen 2 bracket. So this morning I replaced the BF with the MGW/Barton combo. The install of the MGW bushings was just as it is in the video, simple just time consuming. I did have to tap the bushing in, it was a snug fit. The Two post Barton bracket was also a simple install. Together it feels just like the Blowfish Bracket with out all the NVH. I don't even feel the shifter vibrate. Noise is about the same when I was just running the 1st gen Barton bracket. The run down on price, $25.00 for the MGW bushings. $104.00 for the Barton two post. Time to instal it, about 2 hours with removing the BF bracket.

 

[stang8psi]

I have that same combo going in next week.. how is the driving? Coming from the blowfish to this as far as shifting and wot shifts?

 

[Tri-bar]

So far seems to be a smooth. No RPM lockout. Ran it up to 7500 a few time around my little course between 2nd and third up to 5th and back down to 2nd zero issues.

 

[SNKPWR]

I have mgw non-race and the mgw bushings, it's pretty darn good but I haven't had any other mt82 setups