I was very close to sending Larry H. 1/2 the money for a build but he was busy getting ready to go somewhere (honeymoon I thought...). I am not in the loop on this "knowing" about him. Did he not do what he said he would do and was paid to do? anyone got a real quick answer on his last few build problems? Was it he got busy and stopped or he got caught doing something?
Motor is gone
- Thread starter 94tbird
- Start date
ZmanM3
The Evil One
So my next question is why were you one a Chinese wife forum?
Kevin@PMP
Senior Member
He did more (or maybe didn't do would be more appropriate) than I can stand to type here. And he owes a lot of money to some of his customers for what he did and didn't do that caused them to spend a lot of extra money to fix.
Kevin@PMP
Senior Member
Actually Josh found it, by googling his screen name and that forum was one of the results. We laughed about it for hours reading his posts.
Thank you. He put a lot of effort in telling me how he had been out of it for a long time (many years) and was back in it and had time etc. and he was very good at doing it etc. He said whenever I sent him the $1/2 he would have it going but it got down to the details of what I wanted in it etc. and it got too slow (days before email answers) and I dropped of his list I guess. (good thing)
06GT_Vert
Still Stock
Interesting....I have one of his blocks fresh sitting in my garage. Paper weight???
ZmanM3
The Evil One
Hmm, well there is one gentleman on this forum who lives in the middle east that told me he paid for an engine and never got it because he couldn't afford what Larry wanted to ship it and Larry refused to send it to a state side relative how could have sent it to him.
Kevin@PMP
Senior Member
Unfortunately yes... I'd have it torn down and inspected an a minimum by a machine shop that you trust before running it.
ZmanM3
The Evil One
Not necessarily... Mine is running pretty good, I have around 4 or 5K on it.
06GT_Vert
Still Stock
Nice...I continue to have all the luck.....I fuckin quit!!
SD you sure you wanna use it after all?
ZmanM3
The Evil One
Haha, don't be too hasty.
06GT_Vert
Still Stock
Buying shit twice is getting old....and i have bought a crap load twice....done
ZmanM3
The Evil One
Haha, which block is it? How much you want for it?
KIMMER
Admin
- Joined
- Apr 9, 2007
- Posts
- 5,210
- Reaction score
- 23
Luckily Livernois is only a few hours away, so they will be doing my motor when ready. If I was east coast, i'd be knocking on Kevin's door or JDM. Florida area, i'd get a bbr setup. Good people in all area's with great reps.
US-1
Banned
Tell ya' what......how about in exchange for you letting me use it I put the rotating assembly into a new block? I've got two blocks that are good, we won't have to use the motor mount adapters, and we're sure everything is in good shape.
US-1
Banned
Don't know for sure yet. Ron doesn't have it apart yet.
Kevin@PMP
Senior Member
Several things that were identified previously and fixed but it's hard to tell what caused this until the motor is further apart.
thump_rrr
Senior Member
Good news Ron,
You didn't break the dowel pins. I can see them in your pictures still intact and in place.
What you broke is a M6 x 1.0mm bolt. The bolt hole has a depth of 21mm.
Here are a couple of pics of my teksid block for reference
You need a #1 screw extractor and a 5/64" bit.
http://www.sears.com/shc/s/p_10153_12605_00966196000P?mv=rr
You didn't break the dowel pins. I can see them in your pictures still intact and in place.
What you broke is a M6 x 1.0mm bolt. The bolt hole has a depth of 21mm.
Here are a couple of pics of my teksid block for reference
You need a #1 screw extractor and a 5/64" bit.
http://www.sears.com/shc/s/p_10153_12605_00966196000P?mv=rr
Attachments
Last edited:
Similar threads
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details