My install thread :D

[onehotpny]

took some slightly better pics today, but wasnt able to wash due to on/off sprinkling of rain that would have just gotten all messy again

yea i used the liquid stuff they sent with the kit, but apparently im bad at it, so I cleaned it off and used teflon tape that was sitting around

Nice! congrats on getting it done.

 

[TenSpeed]

Looks great!! Nice work.

 

[Wes06]

and some 4x4 for the lulz

 

[LAStang1234]

Great job Wes! These will def be on my NEXT car lol!

 

[TenSpeed]

Looks badass!!!!

 

[Mike K]

Very nice!

 

[Jeremy@AirLift]

Thanks for showing the pic of the system all the way up! That is something I always forget to show...

 

[Wes06]

damn...i take out the camber bolts and i need to put them back in, even with the plates i cant get the camber needed...
gotta drive around at stock height now and look for where i hid those damn things

 

[onehotpny]

Why did you take out the camber bolts in the first place? good luck finding them..

 

[Wes06]

Figured the plates were enough. Oh well. Live and learn
I found em with my tools so they aren't lost. Gonna install my Uca, bolts and bump steer kit this weekend. And headers if I can

 

[onehotpny]

congrats on finding them..

 

[Wes06]

false floor basically done

need to get a border for the rear of the trunk against the plastic molding, and probably going to install a few small pc fans to blow on/exhaust the air near the compressor cause it gets pretty hot
the folding floor is the same pegboard i setup originally, i took some aluminum molding from our old shower and put it on the borders of it to give it more strength.
i will probably replace the stock grey carpet with black to match the floor

 

[Jeremy@AirLift]

Looks great Wes!! What did you use for carpet?

 

[mikeyfitz]

I'll have to start me a build thread. Gonna try and knock it out this weekend. Still not 100% sure how I am gonna do it yet.


Sent from my iPhone 5 using Tapatalk

 

[Wes06]

Looks great Wes!! What did you use for carpet?

Auto zone special. Lol
Glued to a mix of plywood and pegboard

Goodluck on your build mikey. Advice. Do the management first

 

[mikeyfitz]

Auto zone special. Lol
Glued to a mix of plywood and pegboard

Goodluck on your build mikey. Advice. Do the management first

I think will have to start it once I get my other DD back lol. Doesn't look like something I can knock out in 2 days and be happy. So the car will have to get parked in garage, and I just sold the Shelby so I cant drive that anymore. Damn

 

[onehotpny]

I think will have to start it once I get my other DD back lol. Doesn't look like something I can knock out in 2 days and be happy. So the car will have to get parked in garage, and I just sold the Shelby so I cant drive that anymore. Damn

Should have done it before you sold the Shelby! hehehe.. Looking forward to your build..now get her done...

 

[onehotpny]

false floor basically done

need to get a border for the rear of the trunk against the plastic molding, and probably going to install a few small pc fans to blow on/exhaust the air near the compressor cause it gets pretty hot
the folding floor is the same pegboard i setup originally, i took some aluminum molding from our old shower and put it on the borders of it to give it more strength.
i will probably replace the stock grey carpet with black to match the floor

Nice! wouldn't even know it's there..except for the sound.. I'd say the compressor needs fresh air to breath.. those little motors can get awful hot.

 

[onehotpny]

Thanks for showing the pic of the system all the way up! That is something I always forget to show...

Jeremy, did you get my pm about air tank size?

 

[Wes06]

Nice! wouldn't even know it's there..except for the sound.. I'd say the compressor needs fresh air to breath.. those little motors can get awful hot.

yea if you look at the front of the center section the flat carpet actually dips down and doesnt seal up, i am probably going to figure out a way to connect a few small pc fans to get air flow moving through there.

yes it does get really effing hot