n e 1 know the part #'s for arp longer wheel studs?

[beefcake]

just to be legal like i ordered some open end lugs from summitt for my race stars. figure i need studs that are about 1" or so longer than stock

anyone have the front and rear part #'s?

 

[94tbird]

search they are listed many times

 

[beefcake]

search they are listed many times

didn't know if there were any changes for 2011

 

[Konablue10Gt]

I can say with 100% certainty, that the ARP 100-7722 3in fronts fit perfect. You dont even have to pull the brakes off. Just spin the rotor in the right position, use a hammer to punch it out the back, soak the knurl or the ARP's with some WD-40 then use a large hardened washer and an open ended lug nut to pull it back through.

 

[beefcake]

so, i found a thread that had these listed for the rear

http://www.summitracing.com/parts/ARP-100-7703/

they are 13 bucks for 5

the ones listed above on the front

http://www.summitracing.com/parts/ARP-100-7722/

are 67 for a set of 5

whats the big difference

 

[joedls]

so, i found a thread that had these listed for the rear

http://www.summitracing.com/parts/ARP-100-7703/

they are 13 bucks for 5

the ones listed above on the front

http://www.summitracing.com/parts/ARP-100-7722/

are 67 for a set of 5

whats the big difference

knurl size

 

[Konablue10Gt]

The ARP ones fit with no mods. You can use the cheaper Summit ones or Jegs 65110 for the front but you will have to drill the hub to fit the larger knurl.

 

[beefcake]

The ARP ones fit with no mods. You can use the cheaper Summit ones or Jegs 65110 for the front but you will have to drill the hub to fit the larger knurl.

after talking to jegs, it appears the part # i found "using search" is not the proper part #, it is one # off from the original ones you posted.

i would prefer to use the arps, but man, they are expensive

 

[joedls]

Those are both ARPs, just different sizes.

 

[beefcake]

Those are both ARPs, just different sizes.

i know, i just think the nearly 6 fold price increase is ridiculous for the newer mustangs

 

[joedls]

i know, i just think the nearly 6 fold price increase is ridiculous for the newer mustangs

I assume they price it that way because of its unique knurl size. Since it's probably unique to Mustangs, there isn't enough of a demand to drive the price down. That would be my guess anyway.