Need an Oil Seperator on the new 5.0? YEP!!

[KungFuHamster]

Very very cool, thank you for posting!

A must do mod for sure!
Jay

damn. after seeing the previous post...and knowing that my car is about to roll over 1k miles, i may seriously look into one of these things.

 

[Liquid]

Glad I am getting this installed on my car with less than 400 miles on the clock. An ounce of prevention is worth a pound of cure.

 

[Tucker]

FYI, we have released the plug and play kit for the driver side.

I will be up front and say that 90% of you will not see oil on the driver side in normal street driving.
The only time I was able to get oil on the driver side is when on the road course. High RPM and tons of on/off WOT will cause a draw on the driver side and pump oil into the intake tube.
I actually filled my separator in 1 30 minute session.
But again, most will only need the passenger side.

JLT Oil Separators

 

[hawkeye18]

My black can is still on back order. Any idea when you might get some more in?

 

[KonaGT]

I ordered one about a week ago, and they told me it would ship out today as they were waiting on the hoses from Ford. I really hope it does because I want this thing in ASAP lol.

 

[Tucker]

My black can is still on back order. Any idea when you might get some more in?

Black separators are in stock, clear is out of stock.
Hoses are on back order and due here tomorrow.

I ordered one about a week ago, and they told me it would ship out today as they were waiting on the hoses from Ford. I really hope it does because I want this thing in ASAP lol.

Hoses are due in tomorrow, but many have gone out all week. You will get a tracking number in the email if purchased from us.

Thanks
Jay

 

[KonaGT]

Cool I will keep a lookout for the email I have a black one on order. Thanks for the help.

 

[GeorgeInNePa]

Just under 2200 miles...

Pretty much all winter long. I live less than 2 miles from where I work so the car doesn't really have time to warm up so there is a lot of moisture in there.

 

[RDK]

that seems like alot ??

 

[filtercharger]

Hey Jay! I have a Kenne Bell on mine and the hose has been extended from where it usually goes back into the intake, can I send you a pic to see if I can have you fab something for my set up? thanks in advance!
Frank

 

[hawkeye18]

I just installed mine today. Install took maybe 30 seconds once I got the engine cover off - but you should probably mention that if you have a STB, that will need to come off in order to remove the engine cover - it won't slide under the STB. 4 13mm bolts and it comes right off. It's heavy!

I'll check back in a few hundred miles to see what all it's caught.

(yes, this is copied from TMS, but I figured I'd say it here too)

 

[Whocares05050]

So after the weekend alone, and only 100 miles, the cans already collected about a teaspoon of oil. I did beat on it though... Im glad i added this now at 3500 miles, and not down the road...

 

[copracer288]

I just installed mine today. Install took maybe 30 seconds once I got the engine cover off - but you should probably mention that if you have a STB, that will need to come off in order to remove the engine cover - it won't slide under the STB. 4 13mm bolts and it comes right off. It's heavy!

I'll check back in a few hundred miles to see what all it's caught.

(yes, this is copied from TMS, but I figured I'd say it here too)

Actually, I just lifted up the corner of the engine cover and installed it. No removal necessary.

 

[Tucker]

Hey Jay! I have a Kenne Bell on mine and the hose has been extended from where it usually goes back into the intake, can I send you a pic to see if I can have you fab something for my set up? thanks in advance!
Frank

We don't have a plug and play kit for the KB cars, but you can get our base kit and plumb it yourself very easy.

I just installed mine today. Install took maybe 30 seconds once I got the engine cover off - but you should probably mention that if you have a STB, that will need to come off in order to remove the engine cover - it won't slide under the STB. 4 13mm bolts and it comes right off. It's heavy!

I'll check back in a few hundred miles to see what all it's caught.

(yes, this is copied from TMS, but I figured I'd say it here too)

\/ \/

Actually, I just lifted up the corner of the engine cover and installed it. No removal necessary.

/\ /\


You don't need to remove the engine cover or strut bar to install the separator. We include directions on lifting the cover and how to unclip the hoses.

Great pictures of the oil collected, thanks!

Jay

 

[limetym]

got one for my 5oh when i first bought the car and i am happy that i did. i empty mine out every 700 or so miles and find about a teaspoon and a half in it every time. great product and i think every 5oh needs one. oh yeah, the jlt looks the best out of all the other brands too. good job guys.

 

[Blownblu03]

I was out in Bradenton Florida for the NMRA ford nationals and picked up my black JLT can from Brenspeeds booth. Great bunch of guys!!!!

 

[Tucker]

Thanks guys!

 

[1slo5ohh]

ordered mine last night, got an email saying it would ship the 23rd then bout an hour later got another email, the 23rd came early and it shipped today lol .. cant wait to put it on when i do my boss intake, keep the oil outta the damn thing lol

 

[Whocares05050]

Hey Jay.

Is there any need to clean these cans out down the road? The oil collects up top, then its dripped intot the can through the mesh material. I guess what im asking is after so many miles would it be a good idea to maybe throw some brake cleaner down the hoses or anything? Thanks.

 

[Tucker]

Yes, I say spray the filter clean about every 5-10,000 miles wit hany degreeser or brake cleaner..