Need some help knowing if this set up would be safe

[Travis Johnson]

Hey everyone

So I feel a bit lost while trying to research proper fuel delivery for my turbo kit and it's fuel injectors that will come part of it. Its a on3 Performance Twin setup for my 2014 5.0, and I'll be using the 1050 CC injector dynamics, will using a fuel pump such as DeatschWerks pump be safe and efficient for the 1050 CC injectors? It says its flow rate is 100-199 Gal/Hr and 95-100 PSI of pressure, or am I just looking too much into this? Please let me know, Thanks!

 

[stkjock]

@JeremyH is the man for,this question

 

[JeremyH]

Depends on how much boost and power your trying to run and what fuel. That determines overall fueling needs. Which DW pump model?

 

[Travis Johnson]

I will be running 91 Octane and the pump is this one
DeatschWerks Mustang 415 LPH In Tank Fuel Pump w/ Install Kit 9-401-1046 (11-14 GT, V6) (americanmuscle.com)

 

[JeremyH]

I will be running 91 Octane and the pump is this one
DeatschWerks Mustang 415 LPH In Tank Fuel Pump w/ Install Kit 9-401-1046 (11-14 GT, V6) (americanmuscle.com)

Yes the pump is adequate and injectors are plenty for 91 octane setup. Only thing I would add is a fpcm wire upgrade to properly handle the increased current of the larger fuel pump.

 

[Travis Johnson]

Thank you so much @JeremyH
I've been so lost on this research, got it, I will go ahead with this set up and add a wire with the pump

 

[JeremyH]

I make wire kits if you want one.
https://m.facebook.com/story.php?story_fbid=1226724317524401&id=229119453951564

 

[Travis Johnson]

I might go with that when I go with this set up, is the standard kit the one I'll need?

 

[JeremyH]

I might go with that when I go with this set up, is the standard kit the one I'll need?

Yes.

 

[Travis Johnson]

Thanks again for the help! Ill be looking at the standard kit soon