Nitrous guys

[MindIfISmoke?]

What are u running for spark plugs and what is your gap setup at?

My setup
Zex kit with 100 shot pills for starters
Zex window switch
Kb Bap

Also what do u have your window switches set to?

Thanks,
Matt

Sent from my DROIDX using Tapatalk

 

[MOC826]

if you search a little, this topic has been covered quite a bit. but i guess a quick run down

spark plugs: ht0's gapped at .32-.34

not sure on the window switch but if you search you may be able to find something

 

[3VPOWA]

I was running a 100-shot on FRPP one-step colder plugs, stock gap. Window switch set at 3200 - 6300 RPM, 6500 RPM rev limit shifting at 6200.

 

[silverstang07]

I ran 100 shot on stock plugs for a long time. Swapped out to ht0s. My stock plugs lasted alot longer and never had a problem running them.

 

[Sprayin Blue 3V]

It depends what year your car is. I have the newer designed heads, so I use brisk one step colder plugs. On the older style head (05-mid 08) the HT0 is the plug. I have my gap set at .032".

FWIW I ran a 100 shot on stock plugs, stock gap, stock fuel system, on a 93 motor tune and was fine. I wouldn't suggest it though, better safe than sorry.

 

[Limetime]

FRPP plugs 1 heat range colder, don't need a BAP for a 100shot
window switch 3k off at 6,500
bottle warmer of a nano system

 

[TheKurgan]

FRPP plugs 1 heat range colder, don't need a BAP for a 100shot
window switch 3k off at 6,500
bottle warmer of a nano system

I would set the window switch to kick off at 6000 - 6300. You don't want to hit the rev limiter when spraying nitrous. KABOOM. I'd set it at 6200 and shift at 6400.

You're right you don't need a BAP for a 100 shot though. I've datalogged many times and the fpdc never gets above 50%. Not for the Zex kit.