On3 turbo build

[GT500KR]

subscribed.

hope you get this figured out man! was going to do this myself as well. going a different route now.

GOOD LUCK
just take your time and be patient. like its been said earlier. deep breathes and and double verify everything... one small thing over looked now can cost thousands...

 

[killswitch06GT]

one other thing is that i did not put on a breather yet where my pcv valve went on passenger side. Totally forgot. can that cause it?

 

[killswitch06GT]

i also did not use a new intake manifold gasket when i took it off for the crossover. I honestly dont remember seeing it. man i need to slow down.

 

[05stroker]

i also did not use a new intake manifold gasket when i took it off for the crossover. I honestly dont remember seeing it. man i need to slow down.

Are you saying you think you left them off or just that you reused the old ones?

I have my same ones from 05 on my car and they have been removed several times and reused.

 

[killswitch06GT]

I reused the old ones yes

 

[killswitch06GT]

Think I found a boost leak from compressor outlet . Let's hope

 

[Bobby]

what was the leak exactly.

 

[killswitch06GT]

The coupling somewhere. Not completely sure yet. Its really cold ATM and don't feel like messing with it. Plus it's about to snow

 

[killswitch06GT]

Update! I was making boost it seems after all. Somehow I got a boost gauge the reads in bars and not psi. 0.7 bars is somewhere around 10 psi? Anyway I'll get it tuned whenever I get a new throttle body.

 

[killswitch_c]

Why did you buy a gauge that the european countrys and over seas use???

Sent from my DROID2 GLOBAL using Tapatalk

 

[MindIfISmoke?]

Why did you buy a gauge that the european countrys and over seas use???

Sent from my DROID2 GLOBAL using Tapatalk

lol

 

[killswitch06GT]

Lol well it's deff not what I ordered.. I think ima get a plx gauge noe

 

[GT500KR]

are you running 10psi with no tune???

 

[killswitch_c]

I'm running 9 with a base tune for now

Sent from my DROID2 GLOBAL using Tapatalk

 

[Sofakingfast]

one other thing is that i did not put on a breather yet where my pcv valve went on passenger side. Totally forgot. can that cause it?

Fix that your pushing boost into the crank case... Not good

 

[killswitch06GT]

I'm pushing boost into the crank case? The valve is open to atmosphere how is there boost going to it?

 

[one eyed willy]

what do you have connecterd to the driver side valve cover? anything or is it vented to the atmosphere like the passenger side?

 

[killswitch06GT]

It goes to the intake manifold and the passenger goes to atmosphere

 

[JeremyH]

Plug the manifold and put breathers on both sides.

 

[crmpman2]

Yea If you don't put a catch can or breather on both sides you will start smelling oil out the exhuast or even see a little smoke. Just helped zexystang2 with his. Under boost he was getting alot of oil off the driverside and it was smoking just a little bit. Put a Oil catch can on and no more smoke or oil smell.