Post your best 1/4 MILE ETs here!

Status
Not open for further replies.

Rygen

I can break any motor!
Joined
Jul 17, 2007
Posts
499
Reaction score
2
Complete Metco rear suspension package is going in the car while it is in California. Rear end is getting 9" housing ends, Moser axles, Detroit Locker, 3.55 or 3.73 gears, and girdle cover. Not taking any chances. Roll bar is being fabbed early next week. We figure the car should go well below 11.49 so all of this is going to be installed before the car leaves for the Reynolds NMRA race. Talked to Precision Industries today and we settled on 3500 rpm stall speed. Sponsor is really excited about the power we're making on such a mild tune. We'll see what happens in four weeks.

Very cool, impressive as well! I see high 10's in your future. With all the TQ you have, and that high of a stall, I would go 3.55's. If I didn't already have 3.75's in my car, I would be going with 3.55's as well.
 

2k05gt

Senior Member
Joined
Jul 10, 2007
Posts
1,912
Reaction score
21
Location
Manassas, VA
Best Time to date, N/A all motor Bolt-ons and Stock Auto tranny

60' - 1.845
330 - 5.158
1/8 - 7.936
MPH - 87.91
1000 - 10.357
1/4 - 12.415
MPH - 109.35
 

Rygen

I can break any motor!
Joined
Jul 17, 2007
Posts
499
Reaction score
2
Best Time to date, N/A all motor Bolt-ons and Stock Auto tranny

60' - 1.845
330 - 5.158
1/8 - 7.936
MPH - 87.91
1000 - 10.357
1/4 - 12.415
MPH - 109.35

Insane NA times Scott. Enjoyed watching you run yesterday, that car is really dialed in nicely.
 

edyuly

Junior Member
Joined
Jun 12, 2007
Posts
33
Reaction score
0
Location
pa
my best time on stock pirellis at Island dragway was


60ft 2.044
330 5.543
1/8 8.404
mph 86.03
1000 10.835
1/4 12.891
mph 109.54


with jlt cold air intake sct tuned by brenspeed,nsr comp cams, off-road x pipe, steeda pulley.
 

stkjock

---- Madmin ----
Staff member
Administrator
Super Moderator
Joined
Jul 10, 2007
Posts
40,526
Reaction score
3,335
Location
Long Island NY
update for all details

tire - BFG 265/40/18 DR
60 - 1.71
330 - 5.123
1/8 - 7.92 @ 89.1
1000 - 10.337
1/4 - 12.33 @ 112.33
TEMP - 71* Baromter - 29.69 Elev - 87'
 

racevert

ZKiller
Joined
Aug 13, 2007
Posts
304
Reaction score
1
Location
Illinois
Please add me in to the list for ETs. I posted this in post 118 but seems I was left out.


2006 Mustang GT
4.6 3-valve (stock engine)
Kenne Bell 2.4
auto trans
M/T ET Streets

ET - 11.46 seconds
Trap Speed - 117.57 MPH
ET - 7.27 seconds
Trap Speed - 94.15 MPH
 

Attachments

  • 11[1].46jpg.jpg
    11[1].46jpg.jpg
    139.7 KB · Views: 7
Last edited:

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
update for all details

tire - BFG 265/40/18 DR
60 - 1.71
330 - 5.123
1/8 - 7.92 @ 89.1
1000 - 10.337
1/4 - 12.33 @ 112.33
TEMP - 71* Baromter - 29.69 Elev - 87'

Thanks---on the list now

Please add me in to the list for ETs. I posted this in post 118 but seems I was left out.


2006 Mustang GT
4.6 3-valve (stock engine)
Kenne Bell 2.4
auto trans
M/T ET Streets

ET - 11.46 seconds
Trap Speed - 117.57 MPH
ET - 7.27 seconds
Trap Speed - 94.15 MPH

Yep---I missed that---will add it on the next update which will be today.
 

PNR Welding

Senior Member
Joined
Jul 10, 2007
Posts
2,309
Reaction score
5
Location
Hammonton, NJ
Hey can you update mine on the log.
DSC00152.jpg
 

SlvrS197

Member
Joined
Sep 21, 2007
Posts
640
Reaction score
0
Last Nights best at Lonestar in Sealy.
60' 1.77
330' 5.34
1/8 8.27
mph 83.4
1000' 10.75
1/4 12.90
mph 107.5
 

SlvrS197

Member
Joined
Sep 21, 2007
Posts
640
Reaction score
0
BTW mods are.. JLT CAI and tune from Doug at bamachips, and an O/R x-pipe with borla stingers.
 

hdmlnium

low 10 sec club....lol
Joined
Feb 23, 2008
Posts
84
Reaction score
0
Location
Maine
Went to the track last night and made a couple of passes. Still waiting on getting a few mods installed to better my 60' times and then I hope to be in the 11's. If not after that I have a set of 15" Bogart wheels coming with some 28" tall Mickey Thompson ET Streets.
My slip looked like this;

R/T.....051
60'.....1.913
330'...5.304
1/8....7.999
mph...93.54
1000'..10.318
1/4....12.256
mph...116.71

Anyway, enjoy the little video clip and there will be more mods and videos to come..

Bill


http://media.putfile.com/12256-at-117
 

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
NEW BEST at Irwindale and my nemesis is defeated!!!

A 6.74 at 101.56 with a 1.431 60' time! Then I backed it up with a 6.78 @ 102.12 mph!

So the first slip car 3896 (me) vs GT4Dino (4624). My margin of victory was only .0370, so it was close. Plus Dean got me by .074 on the tree. But I finally beat Dean after like 8 attempts. I have the video of that which I will post up tomorrow.

Second slip was 3896 (me) vs Ken3030 (4611). I lost to the 3.4 whipple. Still ran a 6.78 at 102.12 (my best mph) but it wasn't enough to hold off the 3.4 with the street tune, which ran a 6.59 @ 104.61. I got this on video as well which I will post up in the video section tomorrow as well.

Here are the slips---most everyone was there today----here is a pic of us all.

I will try to post the vid up soon......
 

Attachments

  • Irwindale042008a.jpg
    Irwindale042008a.jpg
    147.4 KB · Views: 8
  • Irwindale042008b.jpg
    Irwindale042008b.jpg
    148.2 KB · Views: 4

tom281

Warp Rider
Joined
May 21, 2007
Posts
471
Reaction score
0
My fastest time yet, ran today 4/26

11.747 @ 119.4 with a 1.628 60' and 7.60 1/8 mile.
 
Status
Not open for further replies.

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top